# SOME DESCRIPTIVE TITLE.
# Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER
# This file is distributed under the same license as the PACKAGE package.
# FIRST AUTHOR <EMAIL@ADDRESS>, YEAR.
#
#, fuzzy
msgid ""
msgstr ""
"Project-Id-Version: PACKAGE VERSION\n"
"POT-Creation-Date: 2002-07-16 17:27+0800\n"
"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
"Language-Team: LANGUAGE <LL@li.org>\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=CHARSET\n"
"Content-Transfer-Encoding: 8bit\n"

#: lib/CPANPLUS/Configure/Setup.pm:168
msgid ""
"\n"
"Where would you like to save the CPANPLUS Configuration file?\n"
"\n"
"If you wish to use a custom configuration file, or do not have administrator\n"
"privileges, you probably can't or don't want to write to the systemwide perl\n"
"installation directory. In this case, you must provide an alternate location\n"
"(like your home directory) where you do have permissions.\n"
"\n"
"You can override the system wide CPANPLUS Configuration file by setting\n"
"    $ENV{PERL5_CPANPLUS_CONFIG}\n"
"to the path of your personal configuration file.\n"
"\n"
"Note that if you choose to use a custom configuration file you MUST set the\n"
"environment variables BEFORE running 'make', or CPANPLUS will be unable to find\n"
"your custom location and most likely prompt you for setup again.\n"
"\n"
"If you are unsure what to answer here, just hit ENTER and CPANPLUS will try to\n"
"put your Configuration file in the default location.\n"
"\n"
"1) %1\n"
"2) %2\n"
"3) Somewhere else\n"
msgstr ""

#: lib/CPANPLUS/Configure/Setup.pm:168
msgid ""
"\n"
"\n"
"CPAN is the world-wide archive of perl resources. It consists of about\n"
"100 sites that all replicate the same contents all around the globe.\n"
"Many countries have at least one CPAN site already. The resources found\n"
"on CPAN are easily accessible with CPANPLUS modules. If you want to use\n"
"CPANPLUS, you have to configure it properly.\n"
"\n"
msgstr ""

#: lib/CPANPLUS/Configure/Setup.pm:1534
msgid ""
"\n"
"\n"
"If there are any additional URLs you would like to use, please add them\n"
"now.  You may enter them separately or as a space delimited list.\n"
"\n"
"We provide a default fall-back URL, but you are welcome to override it\n"
"with e.g. 'http://www.cpan.org/' if LWP, wget or curl is installed.\n"
"\n"
"(Enter an empty string when you are done, or to simply skip this step.)\n"
"\n"
"Note that if you want to use a local depository, you will have to enter\n"
"as follows:\n"
"\n"
"file://server/path/to/cpan\n"
"\n"
"if the file is on a server on your local network or as:\n"
"\n"
"file:///path/to/cpan\n"
"\n"
"if the file is on your local disk. Note the three /// after the file: bit\n"
"\n"
msgstr ""

#: lib/CPANPLUS/Configure/Setup.pm:1249
msgid ""
"\n"
"\n"
"Now we need to know where your favorite CPAN sites are located. Push a\n"
"few sites onto the array (just in case the first on the array won't\n"
"work).\n"
"\n"
"If you are mirroring CPAN to your local workstation, specify a file:\n"
"URI by picking the [c] option.\n"
"\n"
"Otherwise, let us fetch the official CPAN mirror list and you can pick\n"
"the mirror that suits you best from a list by using the [m] option;\n"
"First, pick a nearby continent and country. Then, you will be presented\n"
"with a list of URLs of CPAN mirrors in the country you selected. Select\n"
"one or more of those URLs.\n"
"\n"
"Note, the latter option requires a working net connection.\n"
"\n"
msgstr ""

#: Makefile.PL:223
msgid ""
"\n"
"### PLEASE NOTE ###################################################\n"
"\n"
"Although the core features of CPANPLUS does not require external\n"
"modules, it may depend on other modules to work according to your\n"
"configuration.  If you skip the probing, or answer 'n' to questions\n"
"that defaults to 'Y', there might be _unpredictable failures_!\n"
"\n"
"###################################################################\n"
msgstr ""

#: Makefile.PL:38
msgid ""
"\n"
"### PLEASE NOTE ###################################################\n"
"\n"
"CPANPLUS will replace CPAN.pm in the 5.10 core. Although you should\n"
"*NOT* expect it to work just like CPAN.pm, there is a compatible\n"
"shell available. See perldoc CPANPLUS::Shell after installation\n"
"\n"
"You are strongly urged to configure CPANPLUS now, since otherwise\n"
"non-privileged (non-root) users may be unable to use CPANPLUS until\n"
"you configure it properly.\n"
"\n"
"###################################################################\n"
msgstr ""

#: lib/CPANPLUS/Configure/Setup.pm:181
msgid ""
"\n"
"Although we recommend an interactive configuration session, you can\n"
"also enter 'n' here to use default values for all questions.\n"
"\n"
msgstr ""

#: lib/CPANPLUS/Configure/Setup.pm:591
msgid ""
"\n"
"CPANPLUS has support for the Test::Reporter module, which can be utilized\n"
"to report success and failures of modules installed by CPANPLUS.  Would\n"
"you like to do this?  Note that you will still be prompted before\n"
"sending each report.\n"
"\n"
msgstr ""

#: lib/CPANPLUS/Configure/Setup.pm:698
msgid ""
"\n"
"If you are connecting through a firewall or proxy that doesn't handle\n"
"FTP all that well you can use passive FTP.\n"
"\n"
msgstr ""

#: lib/CPANPLUS/Configure/Setup.pm:299
msgid ""
"\n"
"If you like, CPAN++ can add extra directories to your @INC list starts\n"
"during startup.  Enter a space separated list of list to be added to\n"
"your @INC, quoting anything with embedded whitespace.  (To clear the\n"
"current value enter a single space.)\n"
"\n"
msgstr ""

#: lib/CPANPLUS/Configure/Setup.pm:337
msgid ""
"\n"
"In normal operation I can just give you basic information about what I\n"
"am doing, or I can be more verbose and give you every little detail.\n"
"\n"
msgstr ""

#: lib/CPANPLUS/Configure/Setup.pm:367
msgid ""
"\n"
"In the interest of speed, we keep track of what modules were installed\n"
"successfully and which failed in the current session.  We can flush this\n"
"data automatically, or you can explicitly issue a 'flush' when you want\n"
"to purge it.\n"
"\n"
msgstr ""

#: lib/CPANPLUS/Configure/Setup.pm:275
msgid ""
"\n"
"Like Makefile.PL, we run 'make' and 'make install' as separate processes.\n"
"If you have any parameters (e.g. '-j3' in dual processor systems) you want\n"
"to pass to the calls, please specify them here.\n"
"\n"
"In particular, 'UNINST=1' is recommended for root users, unless you have\n"
"fine-tuned ideas of where modules should be installed in the \\@INC path.\n"
"\n"
"Enter a name=value list separated by whitespace, but quote any embedded\n"
"spaces that you want to preserve.  (Enter a space to clear any existing\n"
"settings.)\n"
"\n"
"Again, if you don't understand this question, just press ENTER.\n"
"\n"
msgstr ""

#: lib/CPANPLUS/Configure/Setup.pm:249
msgid ""
"\n"
"Makefile.PL is run by perl in a separate process, and accepts various\n"
"flags that controls the module's installation.  For instance, if you\n"
"would like to install modules to your private user directory, set\n"
"'makemakerflags' to:\n"
"\n"
"LIB=~/perl/lib INSTALLMAN1DIR=~/perl/man/man1 INSTALLMAN3DIR=~/perl/man/man3\n"
"\n"
"and be sure that you do NOT set UNINST=1 in 'makeflags' below.\n"
"\n"
"Enter a name=value list separated by whitespace, but quote any embedded\n"
"spaces that you want to preserve.  (Enter a space to clear any existing\n"
"settings.)\n"
"\n"
"If you don't understand this question, just press ENTER.\n"
"\n"
msgstr ""

#: lib/CPANPLUS/Configure/Setup.pm:1489
msgid ""
"\n"
"Now, we are going to fetch the mirror list for first-time configurations.\n"
"This may take a while...\n"
"\n"
msgstr ""

#: lib/CPANPLUS/Configure/Setup.pm:429
msgid ""
"\n"
"Sometimes a module will require other modules to be installed before it\n"
"will work.  CPAN++ can attempt to install these for you automatically\n"
"if you like, or you can do the deed yourself.\n"
"\n"
"If you would prefer that we NEVER try to install extra modules\n"
"automatically, select NO.  (Usually you will want this set to YES.)\n"
"\n"
"If you would like to build modules to satisfy testing or prerequisites,\n"
"but not actually install them, select B[uild].\n"
"\n"
"NOTE: This feature requires you to flush the 'lib' cache for longer\n"
"running programs (refer to the CPANPLUS::Backend documentations for\n"
"more details).\n"
"\n"
"Otherwise, select ASK to have us ask your permission to install them.\n"
"\n"
msgstr ""

#: lib/CPANPLUS/Configure/Setup.pm:810
msgid ""
"\n"
"The CPAN++ module needs a directory of its own to cache important index\n"
"files and maybe keep a temporary mirror of CPAN files.  This may be a\n"
"site-wide directory or a personal directory.\n"
"\n"
msgstr ""

#: lib/CPANPLUS/Configure/Setup.pm:624
msgid ""
"\n"
"The Module::Signature extension allows CPAN authors to sign their\n"
"distributions using PGP signatures.  Would you like to check for\n"
"module's cryptographic integrity before attempting to install them?\n"
"Note that this requires either the 'gpg' utility or Crypt::OpenPGP\n"
"to be installed.\n"
"\n"
msgstr ""

#: lib/CPANPLUS/Configure/Setup.pm:478
msgid ""
"\n"
"The modules in the CPAN archives are protected with md5 checksums.\n"
"\n"
msgstr ""

#: lib/CPANPLUS/Configure/Setup.pm:560
msgid ""
"\n"
"To speed up the start time of CPAN++ we can use Storable to freeze some\n"
"information.  Would you like to do this?\n"
"\n"
msgstr ""

#: bin/cpansmoke:201
#, fuzzy
msgid ""
"\n"
"Usage:\n"
"  $0 [ -acflpv ] [ -t timeout ] <module | distribution> ...\n"
"\n"
"  -a    Automatically send reports without prompting or editing\n"
"  -c    Always Cc: to the module author (only on FAIL by default)\n"
"  -d    Display each package's existing result before testing it\n"
"  -f    Force re-fetching cached packages and checksum data\n"
"  -i    Don't cc FAIL reports to author if two or more FAILs were reported\n"
"  -l    Use user-configured hosts; www.cpan.org is preferred by default\n"
"  -p    Fetch, make and test (but not install) prerequisite modules\n"
"  -s    Skip modules that have testing results from the same settings\n"
"  -u    Skip modules that have more than one testing results as UNKNOWN\n"
"  -v    Print verbose proceeding informations\n"
"  -t    Sets timeout for each package's install; defaults to 300\n"
"\n"
msgstr ""

#: lib/CPANPLUS/Configure/Setup.pm:399
msgid ""
"\n"
"Usually, when a test fails, I won't install the module, but if you\n"
"prefer, I can force the install anyway.\n"
"\n"
msgstr ""

#: lib/CPANPLUS/Configure/Setup.pm:733
msgid ""
"\n"
"What email address should we send as our anonymous password when\n"
"fetching modules from CPAN servers?  Some servers will NOT allow you to\n"
"connect without a valid email address, or at least something that looks\n"
"like one.\n"
"Also, if you choose to report test results at some point, a valid email\n"
"is required for the 'from' field, so choose wisely.\n"
"\n"
msgstr ""

#. ($pgm, $new_name, $pgm_name)
#: lib/CPANPLUS/Configure/Setup.pm:1061
msgid ""
"\n"
"Which '%1' executable should I use?\n"
"\n"
"1) %2\n"
"2) %3\n"
"3) other\n"
"\n"
msgstr ""

#. ($email, $cf_mail)
#. ($new_path, $cpan_home)
#: lib/CPANPLUS/Configure/Setup.pm:748 lib/CPANPLUS/Configure/Setup.pm:843
msgid ""
"\n"
"You have several choices:\n"
"\n"
"1) %1\n"
"2) %2\n"
"3) something else\n"
"\n"
msgstr ""

#: lib/CPANPLUS/Shell/Default.pm:1074
msgid "    ! EXPR                 # evaluate a perl statement"
msgstr ""

#: lib/CPANPLUS/Shell/Default.pm:1055
msgid "    a AUTHOR ...           # search by author(s)"
msgstr ""

#: lib/CPANPLUS/Shell/Default.pm:1071
msgid "    b                      # write a bundle file for your configuration"
msgstr ""

#: lib/CPANPLUS/Shell/Default.pm:1067
msgid "    c MODULE | NUMBER ...  # check for module report(s) from cpan-testers"
msgstr ""

#: lib/CPANPLUS/Shell/Default.pm:1064
msgid "    d MODULE | NUMBER ...  # download module(s) into current directory"
msgstr ""

#: lib/CPANPLUS/Shell/Default.pm:1070
msgid "    e DIR ...              # add directories to your @INC"
msgstr ""

#: lib/CPANPLUS/Shell/Default.pm:1057
msgid "    f AUTHOR ...           # list all distributions by author(s)"
msgstr ""

#: lib/CPANPLUS/Shell/Default.pm:1051
msgid "    h | ?                  # display help"
msgstr ""

#: lib/CPANPLUS/Shell/Default.pm:1061
msgid "    i MODULE | NUMBER ...  # install module(s), by name or by search number"
msgstr ""

#: lib/CPANPLUS/Shell/Default.pm:1065
msgid "    l MODULE | NUMBER ...  # display detailed information about module(s)"
msgstr ""

#: lib/CPANPLUS/Shell/Default.pm:1056
msgid "    m MODULE ...           # search by module(s)"
msgstr ""

#: lib/CPANPLUS/Shell/Default.pm:1058
msgid "    o [ MODULE ... ]       # list installed module(s) that aren't up to date"
msgstr ""

#: lib/CPANPLUS/Shell/Default.pm:1075
msgid "    p [FILE]               # print the error stack (optionally to a file)"
msgstr ""

#: lib/CPANPLUS/Shell/Default.pm:1052
msgid "    q                      # exit"
msgstr ""

#: lib/CPANPLUS/Shell/Default.pm:1066
msgid "    r MODULE | NUMBER ...  # display README files of module(s)"
msgstr ""

#: lib/CPANPLUS/Shell/Default.pm:1072
msgid "    s [OPTION VALUE]       # set configuration options for this session"
msgstr ""

#: lib/CPANPLUS/Shell/Default.pm:1073
msgid "    s conf | save          # reconfigure settings / save current settings"
msgstr ""

#: lib/CPANPLUS/Shell/Default.pm:1062
msgid "    t MODULE | NUMBER ...  # test module(s), by name or by search number"
msgstr ""

#: lib/CPANPLUS/Shell/Default.pm:1063
msgid "    u MODULE | NUMBER ...  # uninstall module(s), by name or by search number"
msgstr ""

#: lib/CPANPLUS/Shell/Default.pm:1053
msgid "    v                      # version information"
msgstr ""

#: lib/CPANPLUS/Shell/Default.pm:1059
msgid "    w                      # display the result of your last search again"
msgstr ""

#: lib/CPANPLUS/Shell/Default.pm:1076
msgid "    x                      # reload CPAN indices"
msgstr ""

#: lib/CPANPLUS/Shell/Default.pm:1068
msgid "    z MODULE | NUMBER ...  # extract module(s) and open command prompt in it"
msgstr ""

#. ($self->_who_was_it()
#: lib/CPANPLUS/Error.pm:145 lib/CPANPLUS/Error.pm:62
msgid " in %1 at %2"
msgstr ""

#. ($author->{name}, $author->{email})
#: lib/CPANPLUS/Backend.pm:913
msgid "%1 (%2)"
msgstr ""

#. ($self->which, $self->which->VERSION)
#: lib/CPANPLUS/Shell.pm:148
msgid "%1 -- CPAN exploration and modules installation (v%2)"
msgstr ""

#. ($Makefile, $Makefile_PL)
#: lib/CPANPLUS/Internals/Make.pm:213
msgid "%1 already exists, not running 'perl %2' again, unless you force!"
msgstr ""

#. ($dist)
#: bin/cpansmoke:258
msgid "%1 already tested and declared as UNKNOWN two times; skipping.\\n"
msgstr ""

#. ($dist)
#: bin/cpansmoke:254
msgid "%1 already tested on this configuration; skipping.\\n"
msgstr ""

#. ($dist)
#: bin/cpansmoke:127
msgid "%1 already tested on this machine; skipping.\\n"
msgstr ""

#. ($item)
#: lib/CPANPLUS/Dist/PPM.pm:617
msgid "%1 could not be added by Archive::Zip"
msgstr ""

#. ('install()
#: lib/CPANPLUS/Dist/Ports.pm:82
msgid "%1 couldn't chdir to %2! I am in %3 now"
msgstr ""

#. ($mod)
#: lib/CPANPLUS/Internals.pm:636
msgid "%1 does not contain an author directory!"
msgstr ""

#. ($dir)
#: lib/CPANPLUS/Dist/PPM.pm:339
msgid "%1 does not exist, can not PPMify it!"
msgstr ""

msgid "%1 has no size!"
msgstr ""

#. ($file)
#: lib/CPANPLUS/Internals/Extract.pm:67
msgid "%1 has zero size! Can not extract!"
msgstr ""

#. ($ppd)
#. ($makefile)
#: lib/CPANPLUS/Dist/PPM.pm:98 lib/CPANPLUS/Dist/Ports.pm:106
msgid "%1 installed succesfully"
msgstr ""

#. ($mod)
#: lib/CPANPLUS/Internals.pm:427
msgid "%1 installed successfully"
msgstr ""

#. ($mod)
#: lib/CPANPLUS/Shell.pm:296
msgid "%1 is a required module for this install."
msgstr ""

#. ($mod)
#: lib/CPANPLUS/Internals.pm:578
msgid "%1 is not a proper distribution name!"
msgstr ""

#. ($file)
#: lib/CPANPLUS/Configure.pm:350
msgid "%1 is not writable"
msgstr ""

#. ($args->{path}->{local})
#: lib/CPANPLUS/Internals/Fetch.pm:332
msgid "%1 is up to date"
msgstr ""

#. ("lynx")
#. ("ncftpget")
#. ("wget")
#. ("ncftp")
#. ("curl")
#. ("rsync")
#: lib/CPANPLUS/Internals/Fetch.pm:1032 lib/CPANPLUS/Internals/Fetch.pm:1098
#: lib/CPANPLUS/Internals/Fetch.pm:677 lib/CPANPLUS/Internals/Fetch.pm:753
#: lib/CPANPLUS/Internals/Fetch.pm:830 lib/CPANPLUS/Internals/Fetch.pm:897
#: lib/CPANPLUS/Internals/Fetch.pm:972
msgid "%1 not available"
msgstr ""

#. ($stored)
#: lib/CPANPLUS/Internals/Source.pm:476
msgid "%1 not writable; skipped."
msgstr ""

#. ($method, $path->{local})
#: lib/CPANPLUS/Internals/Fetch.pm:210
msgid "%1 said it fetched %2, but it was not created!"
msgstr ""

#. ($ppd)
#: lib/CPANPLUS/Dist/PPM.pm:175
msgid "%1 uninstalled succesfully"
msgstr ""

#. ($key, $set->{$key})
#: lib/CPANPLUS/Shell.pm:281
msgid "%1 was set to %2"
msgstr ""

#. ($key)
#: lib/CPANPLUS/Shell.pm:269 lib/CPANPLUS/Shell.pm:277
msgid "%1 was set to:"
msgstr ""

#. ($total)
#: lib/CPANPLUS/Configure/Setup.pm:1411
msgid "%quant(%2,host) selected thus far."
msgstr ""

#. ($name)
#: lib/CPANPLUS/Shell/Default.pm:387
msgid "'%1' is not a valid configuration option!"
msgstr ""

msgid "'%1' is not a valid option for %2"
msgstr ""

#. ($name, $type)
#: lib/CPANPLUS/Backend/RV.pm:199
msgid "'%1' is not an existing accessor for '%2'"
msgstr ""

msgid "'%1' is not of a valid type for %2, using default instead!"
msgstr ""

#. ($CPANPLUS::Internals::VERSION, $what)
#: lib/CPANPLUS/Configure/Setup.pm:157
msgid "*** Error: CPANPLUS %1 was not configured properly, and we cannot write to\n    %2"
msgstr ""

#: lib/CPANPLUS/Configure/Setup.pm:158
msgid "*** Please check its permission, or contact your administrator."
msgstr ""

#: lib/CPANPLUS/Shell.pm:149
msgid "*** Please report bugs to <cpanplus-bugs\\@lists.sourceforge.net>."
msgstr ""

#. ($cpan->VERSION, $rl_avail)
#: lib/CPANPLUS/Shell.pm:150
msgid "*** Using CPANPLUS::Backend v%1.  %2"
msgstr ""

#. ('p')
#: lib/CPANPLUS/Shell/Default.pm:436
msgid "*** You can view the complete error buffer by pressing '%1' ***\\n"
msgstr ""

#: lib/CPANPLUS/Configure/Setup.pm:1130 lib/CPANPLUS/Configure/Setup.pm:327
msgid "*nothing entered*"
msgstr ""

#: Makefile.PL:271
msgid ".zip files support"
msgstr ""

#: lib/CPANPLUS/Dist/PPM.pm:385
msgid "/bin/tar solution not yet implemented, sorry!"
msgstr ""

#: Makefile.PL:117
msgid "A previous installation detected. Use its settings? [Y/n]: "
msgstr ""

#: lib/CPANPLUS/Internals/Source.pm:365
msgid "Abandoned; volunteers welcome to take over maintainance"
msgstr ""

#. ($mod)
#: lib/CPANPLUS/Internals/Make.pm:274
msgid "According to the cache, %1 failed to install before in this session.. returning!"
msgstr ""

#. ($mod)
#: lib/CPANPLUS/Internals/Make.pm:360
msgid "According to the cache, prerequisite %1 is already installed"
msgstr ""

#. ("@{$lib}")
#: lib/CPANPLUS/Configure/Setup.pm:310
msgid "Additional @INC directories to add? [%1]"
msgstr ""

#. ($fallback_host)
#: lib/CPANPLUS/Configure/Setup.pm:1561
msgid "Additional host(s) to add [%1]: "
msgstr ""

#: lib/CPANPLUS/Configure/Setup.pm:1562
msgid "Additional host(s) to add: "
msgstr ""

#: lib/CPANPLUS/Backend.pm:799
msgid "All cached data has been flushed"
msgstr ""

#: lib/CPANPLUS/Shell/Default.pm:468
msgid "All files downloaded successfully"
msgstr ""

#: lib/CPANPLUS/Shell/Default.pm:314
msgid "All module(s) up to date."
msgstr ""

#. ($target)
#: lib/CPANPLUS/Shell/Default.pm:433
msgid "All modules %tense(%1,past) successfully"
msgstr ""

#: lib/CPANPLUS/Shell/Default.pm:636
msgid "All modules uninstalled successfully"
msgstr ""

#: lib/CPANPLUS/Internals/Source.pm:352
msgid "Alpha testing"
msgstr ""

#. ($mod)
#: lib/CPANPLUS/Tools/Module.pm:327
msgid "Already attempted to use '%1', which was unsuccessful"
msgstr ""

#. ($path->{local})
#: lib/CPANPLUS/Internals/Fetch.pm:139
msgid "Already downloaded %1, won't download again without force"
msgstr ""

#. ($file, $loc)
#: lib/CPANPLUS/Internals/Extract.pm:83
msgid "Already extracted '%1' to '%2'. Won't extract again without force"
msgstr ""

#: lib/CPANPLUS/Internals/Make.pm:445
msgid "Already ran 'make' for this module. Not running again unless you force!"
msgstr ""

#. ($args->{file}, $@)
#: lib/CPANPLUS/Internals/Extract.pm:254
msgid "An error occurred extracting %1: %2"
msgstr ""

#. ($m)
#: lib/CPANPLUS/Internals/Install.pm:193
msgid "An error occurred handling bundle %1"
msgstr ""

#. ($m)
#: lib/CPANPLUS/Internals/Install.pm:170
msgid "An error occurred handling module %1"
msgstr ""

#: lib/CPANPLUS/Dist/PPM.pm:279
msgid "An error occurred while compressing the blib/ directory"
msgstr ""

#: lib/CPANPLUS/Dist/PPM.pm:294
msgid "An error occurred while creating the README file"
msgstr ""

#. ($file)
#: lib/CPANPLUS/Internals/Install.pm:290
msgid "An error occurred while installing bundles from %1"
msgstr ""

#: lib/CPANPLUS/Dist/PPM.pm:273
msgid "An error occurred while writing the .pdd file"
msgstr ""

#: lib/CPANPLUS/Dist/PPM.pm:299
msgid "An error occurred while zipping a distribution"
msgstr ""

#: lib/CPANPLUS/Configure/Setup.pm:188
msgid "Are you ready for manual configuration?"
msgstr ""

#: lib/CPANPLUS/Backend.pm:1188
msgid "Array reference passed, but 'to' only takes one argument."
msgstr ""

#: lib/CPANPLUS/Internals/Source.pm:392
msgid "Artistic license alone"
msgstr ""

#. ($Makefile_PL)
#: lib/CPANPLUS/Internals/Make.pm:174
msgid "Author did not supply a %1 - Attempting to generate one"
msgstr ""

#: lib/CPANPLUS/Shell/Default.pm:388
msgid "Available options and their current values are:"
msgstr ""

#: lib/CPANPLUS/Internals/Source.pm:391
msgid "BSD: The BSD License"
msgstr ""

#. ($Makefile, $!)
#: lib/CPANPLUS/Internals/Make.pm:229
msgid "BUILDING %1 failed! - %2"
msgstr ""

#: lib/CPANPLUS/Internals/Source.pm:353
msgid "Beta testing"
msgstr ""

#. ($builddir)
#: lib/CPANPLUS/Dist/RPM.pm:63
msgid "Build directory %1 doesn't look like an RPM build root"
msgstr ""

#: lib/CPANPLUS/Configure/Setup.pm:1148
msgid "Build options saved\\n"
msgstr ""

#. ("perl-$name-$version-$release.$ARCH.rpm")
#: lib/CPANPLUS/Dist/RPM.pm:246
msgid "Built %1"
msgstr ""

#: lib/CPANPLUS/Internals/Source.pm:371
msgid "C and perl, a C compiler will be needed"
msgstr ""

#: lib/CPANPLUS/Internals/Source.pm:373
msgid "C++ and perl, a C++ compiler will be needed"
msgstr ""

#: lib/CPANPLUS/Shell/Default.pm:80
msgid "CPAN Terminal"
msgstr ""

#: Makefile.PL:349
msgid "CPAN Test reporting"
msgstr ""

#. ($infile)
#: lib/CPANPLUS/Dist/RPM.pm:108
msgid "CPAN tells us the following about %1:"
msgstr ""

#: Makefile.PL:280
msgid "Cached metadata"
msgstr ""

#. ($dir, $!)
#: lib/CPANPLUS/Dist/PPM.pm:538
msgid "Can not open %1: %2"
msgstr ""

msgid "Can't check version on %1... assuming it's up to date"
msgstr ""

#. ("Makefile", $!)
#: lib/CPANPLUS/Internals/Make.pm:781
msgid "Can't find %1: %2"
msgstr ""

#. ($sdbm, $!)
#. ($file, $!)
#: lib/CPANPLUS/Internals/Report.pm:369 lib/CPANPLUS/Tools/Module.pm:177
#: lib/CPANPLUS/Tools/Module.pm:189
msgid "Can't open %1: %2"
msgstr ""

#. ($file, $!)
#: lib/CPANPLUS/Dist/PPM.pm:513
msgid "Can't open[r/w] %1: %2"
msgstr ""

#. ($file, $!)
#: lib/CPANPLUS/Dist/PPM.pm:496
msgid "Can't rewind %1: %2"
msgstr ""

#. ($reporter->errstr)
#: lib/CPANPLUS/Internals/Report.pm:274
msgid "Can't send report: %1"
msgstr ""

#. ($file, $!)
#: lib/CPANPLUS/Dist/PPM.pm:501
msgid "Can't truncate %1: %2"
msgstr ""

#: lib/CPANPLUS/Configure/Setup.pm:1505
msgid "Can't use Backend!"
msgstr ""

#: lib/CPANPLUS/Internals/Fetch.pm:452
msgid "Can't use File::* functions. They should be core modules!"
msgstr ""

#: lib/CPANPLUS/Internals/Fetch.pm:356
msgid "Can't use LWP"
msgstr ""

#: lib/CPANPLUS/Internals/Fetch.pm:598
msgid "Can't use Net::FTP"
msgstr ""

#. ($file, $!)
#: lib/CPANPLUS/Dist/PPM.pm:506
msgid "Can't write to %1: %2"
msgstr ""

#: lib/CPANPLUS/Internals/Make.pm:257
msgid "Cannot determine prerequisites - Aborting"
msgstr ""

#. ($m)
#: lib/CPANPLUS/Internals/Install.pm:81
msgid "Cannot fetch %1 (part of core perl distribution); skipping"
msgstr ""

#. ('nmake', 'ftp')
#: Makefile.PL:488
msgid "Cannot fetch %1 without a working '%2' executable!"
msgstr ""

#. ('nmake', $host)
#: Makefile.PL:445
msgid "Cannot fetch %1; '%2' resolve failed!"
msgstr ""

#. ($mod)
#: lib/CPANPLUS/Internals.pm:680
msgid "Cannot find %1 in the module tree!"
msgstr ""

#. ($mod)
#: lib/CPANPLUS/Backend.pm:1122
msgid "Cannot find distribution for %1, skipping"
msgstr ""

#. ($name)
#: lib/CPANPLUS/Internals/Install.pm:341
msgid "Cannot install bundled module: %1 does not exist!"
msgstr ""

#. ($config)
#: Makefile.PL:74
msgid "Cannot unlink old config file '%1', continuing anyway."
msgstr ""

#. ('Config.pm')
#: Makefile.PL:103
msgid "Cannot write to %1"
msgstr ""

#: lib/CPANPLUS/Shell.pm:99
msgid "Caught SIGINT"
msgstr ""

#: lib/CPANPLUS/Configure/Setup.pm:635
msgid "Check module signatures?"
msgstr ""

#: lib/CPANPLUS/Shell.pm:55
msgid "Check your installation!"
msgstr ""

#: lib/CPANPLUS/Dist/PPM.pm:481
msgid "Checking PPD..."
msgstr ""

#: lib/CPANPLUS/Internals/Source.pm:573
msgid "Checking if source files are up to date"
msgstr ""

#. ($archive)
#: lib/CPANPLUS/Internals/Install.pm:526
msgid "Checksum for %1 OK"
msgstr ""

#. ($file)
#: lib/CPANPLUS/Internals/Install.pm:121
msgid "Checksums did not match for %1"
msgstr ""

#: lib/CPANPLUS/Configure/Setup.pm:1435
msgid "Choose another? [Y/n]: "
msgstr ""

#: lib/CPANPLUS/Configure/Setup.pm:120
msgid "Configuration file name: "
msgstr ""

#. ($method, $mod, $@)
#: lib/CPANPLUS/Internals/Search.pm:237
msgid "Could no get %1 for %2: %3"
msgstr ""

#. ($cwd, $dir, $!)
#: lib/CPANPLUS/Shell/Default.pm:701
msgid "Could not chdir back to %1 from %2: %3"
msgstr ""

#. ($cwd, $dir, $!)
#: lib/CPANPLUS/Shell/Default.pm:691
msgid "Could not chdir from %1 to %2: %3"
msgstr ""

#. ($orig)
#: lib/CPANPLUS/Internals/Extract.pm:139
msgid "Could not chdir into %1"
msgstr ""

#. ($args->{path}->{local}, $!)
#: lib/CPANPLUS/Internals/Fetch.pm:665
msgid "Could not close %1: %2"
msgstr ""

#. ($remote, $local, $!, $@)
#: lib/CPANPLUS/Internals/Fetch.pm:416
msgid "Could not copy %1 to %2: %3 %4"
msgstr ""

#. ($path)
#. ($base)
#. ($local_path)
#: lib/CPANPLUS/Dist/PAR.pm:148 lib/CPANPLUS/Dist/PPM.pm:251
#: lib/CPANPLUS/Dist/Ports.pm:194 lib/CPANPLUS/Internals/Extract.pm:108
#: lib/CPANPLUS/Internals/Fetch.pm:105
msgid "Could not create %1"
msgstr ""

#: lib/CPANPLUS/Dist/PPM.pm:608
msgid "Could not create Archive::Zip object"
msgstr ""

#. ($!)
#: lib/CPANPLUS/Internals/Make.pm:661
msgid "Could not create Makefile.PL - %1"
msgstr ""

#: lib/CPANPLUS/Internals/Search.pm:224
msgid "Could not create an ExtUtils::Installed object"
msgstr ""

#. ($path->{local})
#: lib/CPANPLUS/Internals/Fetch.pm:132
msgid "Could not delete %1, some methods may fail to force a download"
msgstr ""

msgid "Could not determine what dir %1 was built in"
msgstr ""

#. ($mod)
#: lib/CPANPLUS/Shell/Default.pm:686
msgid "Could not determine where %1 was extracted to"
msgstr ""

#. ($dir)
#: lib/CPANPLUS/Dist/PPM.pm:554
msgid "Could not find a .ppd file in %1!"
msgstr ""

#. ($auth)
#: lib/CPANPLUS/Backend.pm:965
msgid "Could not find distributions for %1"
msgstr ""

#: lib/CPANPLUS/Shell/Default.pm:275
msgid "Could not find installation files for all the modules"
msgstr ""

#. ($Makefile_PL)
#: lib/CPANPLUS/Internals/Make.pm:185
msgid "Could not generate %1 - Aborting"
msgstr ""

#. ($name)
#: lib/CPANPLUS/Backend.pm:539
msgid "Could not get files for %1"
msgstr ""

#. ($ENV{PERL5_CPANPLUS_CONFIG}, $@)
#: lib/CPANPLUS/Configure.pm:69
msgid "Could not load your personal config: %1: %2"
msgstr ""

#. ($current, $target, $@)
#: lib/CPANPLUS/Dist/PPM.pm:440
msgid "Could not move %1 to %2: %3"
msgstr ""

#. ($m)
#: lib/CPANPLUS/Internals/Install.pm:143
msgid "Could not obtain extraction directory for module %1"
msgstr ""

#. ($ppd, $!)
#: lib/CPANPLUS/Dist/PPM.pm:158
msgid "Could not open %1 for reading: %2"
msgstr ""

#. ($file, $!)
#. ($makefile, $!)
#. ($distinfo, $!)
#. ($pkg_comment, $!)
#. ($pkg_descr, $!)
#. ($pkg_plist, $!)
#: lib/CPANPLUS/Dist/PPM.pm:675 lib/CPANPLUS/Dist/Ports.pm:211
#: lib/CPANPLUS/Dist/Ports.pm:293 lib/CPANPLUS/Dist/Ports.pm:323
#: lib/CPANPLUS/Dist/Ports.pm:329 lib/CPANPLUS/Dist/Ports.pm:335
msgid "Could not open %1 for writing: %2"
msgstr ""

#. ($archive, $!)
#. ($args->{path}->{local}, $!)
#. ($file, $!)
#: lib/CPANPLUS/Dist/Ports.pm:312 lib/CPANPLUS/Internals/Fetch.pm:653
#: lib/CPANPLUS/Internals/Install.pm:504 lib/CPANPLUS/Internals/Search.pm:311
#: lib/CPANPLUS/Internals/Source.pm:726
msgid "Could not open %1: %2"
msgstr ""

#. ($file)
#: lib/CPANPLUS/Internals/Extract.pm:217 lib/CPANPLUS/Internals/Extract.pm:288
#: lib/CPANPLUS/Internals/Extract.pm:349 lib/CPANPLUS/Internals/Extract.pm:393
msgid "Could not read dir name from %1"
msgstr ""

#. ($!)
#: lib/CPANPLUS/Internals/Fetch.pm:647
msgid "Could not run command: %1"
msgstr ""

#. ($name)
#: lib/CPANPLUS/Backend.pm:600
msgid "Could not uninstall %1"
msgstr ""

#: lib/CPANPLUS/Internals/Utils.pm:33
msgid "Could not use File::Path! This module should be core!"
msgstr ""

#. ($args->{path}->{local}, $!)
#: lib/CPANPLUS/Internals/Fetch.pm:659
msgid "Could not write to %1: %2"
msgstr ""

#. ($file, $conf->_get_ftp('host')
#: lib/CPANPLUS/Internals/Source.pm:539
msgid "Couldn't fetch %1 from %2"
msgstr ""

#. ($source)
#: lib/CPANPLUS/Dist/RPM.pm:184
msgid "Couldn't get a name for %1"
msgstr ""

#. ($source)
#: lib/CPANPLUS/Dist/RPM.pm:185
msgid "Couldn't get a version for %1"
msgstr ""

#. ("perl-$name.spec")
#: lib/CPANPLUS/Dist/RPM.pm:192
msgid "Couldn't open %1 for writing."
msgstr ""

#. ($file, $!)
#: lib/CPANPLUS/Configure/Setup.pm:1748
msgid "Couldn't open %1: %2"
msgstr ""

#. ($file)
#: lib/CPANPLUS/Internals/Source.pm:546
msgid "Couldn't touch %1"
msgstr ""

#. ($file, $!)
#: lib/CPANPLUS/Configure.pm:394
msgid "Couldn't write to %1: %2"
msgstr ""

#: lib/CPANPLUS/Configure/Setup.pm:1431
msgid "Currently selected hosts:"
msgstr ""

#: Makefile.PL:380
msgid "Curses Shell"
msgstr ""

#. ($mod)
#: lib/CPANPLUS/Shell/Default.pm:536
msgid "Details for %1"
msgstr ""

#: lib/CPANPLUS/Internals/Source.pm:362
msgid "Developer"
msgstr ""

msgid "Direct access to private method %1 is forbidden"
msgstr ""

#: Makefile.PL:143
msgid "Do you want to configure CPANPLUS now?"
msgstr ""

#: lib/CPANPLUS/Dist/PAR.pm:107
msgid "Don't know what dir to build in!"
msgstr ""

#: lib/CPANPLUS/Configure/Setup.pm:777
msgid "Email address: "
msgstr ""

#. ($target, $key)
#: lib/CPANPLUS/Shell/Default.pm:428
msgid "Error %tense(%1,present) %2"
msgstr ""

msgid "Error creating %1 dist for %2"
msgstr ""

#. ($format, $mod)
#: lib/CPANPLUS/Backend.pm:270
msgid "Error creating %1 from %2"
msgstr ""

#. ($!)
#: lib/CPANPLUS/Shell/Default.pm:696
msgid "Error executing your subshell: %1"
msgstr ""

#. ($key)
#: lib/CPANPLUS/Shell/Default.pm:464
msgid "Error fetching %1"
msgstr ""

#: lib/CPANPLUS/Tools/Cmd.pm:194
msgid "Error from child: $!"
msgstr ""

#. ($!)
#: lib/CPANPLUS/Internals.pm:840
msgid "Error from child: %1"
msgstr ""

#. ($@)
#: lib/CPANPLUS/Internals/Source.pm:312 lib/CPANPLUS/Internals/Source.pm:315
msgid "Error in eval of dslip source files: %1"
msgstr ""

#. ($mod, $format)
#: lib/CPANPLUS/Backend.pm:278
msgid "Error installing %1 as %2"
msgstr ""

msgid "Error installing bundle %1"
msgstr ""

msgid "Error installing module %1"
msgstr ""

#: lib/CPANPLUS/Internals/Report.pm:334
msgid "Error parsing testers.cpan.org results"
msgstr ""

#: lib/CPANPLUS/Backend.pm:1163
msgid "Error rebuilding trees!"
msgstr ""

#. ($dir, $@)
#: lib/CPANPLUS/Internals/Extract.pm:222
msgid "Error removing %1: %2"
msgstr ""

#: lib/CPANPLUS/Configure/Setup.pm:209
msgid "Error saving your configuration"
msgstr ""

#: lib/CPANPLUS/Backend/RV.pm:62
msgid "Error validating input to 'CPANPLUS::Backend::RV'"
msgstr ""

#. ($mod, $@)
#: lib/CPANPLUS/Internals/Search.pm:455
msgid "Error while validating %1: %2"
msgstr ""

#. ($id)
#: lib/CPANPLUS/Dist/RPM.pm:127
msgid "Error: %1 is contained within Perl itself!"
msgstr ""

#. ($id)
#: lib/CPANPLUS/Dist/RPM.pm:125
msgid "Error: %1 says 'Contact Author'"
msgstr ""

#. ($id)
#: lib/CPANPLUS/Dist/RPM.pm:123
msgid "Error: No file for %1"
msgstr ""

#: lib/CPANPLUS/Shell/Default.pm:1087
msgid "Exiting CPANPLUS shell"
msgstr ""

#. ($_)
#: lib/CPANPLUS/Internals/Extract.pm:226 lib/CPANPLUS/Internals/Extract.pm:277
#: lib/CPANPLUS/Internals/Extract.pm:382
msgid "Extracting %1"
msgstr ""

#. ($_, $file)
#: lib/CPANPLUS/Internals/Extract.pm:358
msgid "Extraction of %1 from %2 failed"
msgstr ""

#: lib/CPANPLUS/Internals/Report.pm:116
msgid "FAIL status already reported. I won't cc the author."
msgstr ""

#. ($ppd_file)
#: lib/CPANPLUS/Dist/PPM.pm:634
msgid "Failed to create zip file for %1"
msgstr ""

#: lib/CPANPLUS/Configure/Setup.pm:1149
msgid "Failed to save build options\\n"
msgstr ""

#. ($SHELL, $err)
#: lib/CPANPLUS/Shell.pm:62
msgid "Failed to use %1: %2"
msgstr ""

#: lib/CPANPLUS/Configure.pm:70
msgid "Falling back to system-wide config."
msgstr ""

#. ($res->code,                             HTTP::Status::status_message($res->code)
#: lib/CPANPLUS/Internals/Fetch.pm:346
msgid "Fetch failed! HTTP response code: %1 [%2]"
msgstr ""

#: lib/CPANPLUS/Internals/Fetch.pm:251
msgid "Fetch failed: host list exhausted - are you connected today?"
msgstr ""

#: lib/CPANPLUS/Internals/Fetch.pm:238
msgid "Fetch failed: no way to download source file!"
msgstr ""

#. ($file)
#: lib/CPANPLUS/Configure/Setup.pm:1510
msgid "Fetch of %1 failed!"
msgstr ""

#. ($response->message, $url)
#: lib/CPANPLUS/Internals/Report.pm:326
msgid "Fetch report failed on %2: %1"
msgstr ""

msgid "Fetch report failed: %1"
msgstr ""

#: lib/CPANPLUS/Shell/Default.pm:446
msgid "Fetching"
msgstr ""

#. ('nmake', $host)
#: Makefile.PL:453
msgid "Fetching '%1' from %2. It may take a few minutes... "
msgstr ""

#: lib/CPANPLUS/Shell/Default.pm:190
msgid "Fetching new indices and rebuilding the module tree"
msgstr ""

#. ($mod)
#: lib/CPANPLUS.pm:93
msgid "Fetching of %1 failed"
msgstr ""

#. ($mod)
#: lib/CPANPLUS.pm:92
msgid "Fetching of %1 successful"
msgstr ""

#. ($url)
#: lib/CPANPLUS/Internals/Report.pm:318
msgid "Fetching: %1"
msgstr ""

#. ($archive, $!)
#: lib/CPANPLUS/Dist/PPM.pm:628
msgid "File '%1' was not created: %2"
msgstr ""

#. ($!)
#: lib/CPANPLUS/Internals/Extract.pm:451 lib/CPANPLUS/Internals/Extract.pm:483
msgid "File creation failed: %1"
msgstr ""

#: Makefile.PL:324
msgid "File::RsyncP support"
msgstr ""

#: lib/CPANPLUS/Configure/Setup.pm:878
msgid "First of all, I'd like to create this directory.  Where?"
msgstr ""

#: lib/CPANPLUS/Configure/Setup.pm:376
msgid "Flush automatically?"
msgstr ""

#: lib/CPANPLUS/Configure/Setup.pm:449
msgid "Follow prereqs?"
msgstr ""

#: lib/CPANPLUS/Configure/Setup.pm:406
msgid "Force installs?"
msgstr ""

#: Makefile.PL:310
msgid "FreeBSD ports distribution"
msgstr ""

#: lib/CPANPLUS/Internals/Source.pm:389
msgid "GPL: GNU General Public License"
msgstr ""

#. ($pgm_name)
#: lib/CPANPLUS/Configure/Setup.pm:1124
msgid "Good, I found '%1' in your PATH:"
msgstr ""

#: lib/CPANPLUS/Shell.pm:101
msgid "Got another SIGINT"
msgstr ""

#. ($file)
#: lib/CPANPLUS/Internals/Extract.pm:432
msgid "Gunzipping %1"
msgstr ""

#. ('world')
#: lib/CPANPLUS/I18N.pm:113
msgid "Hello, %1!"
msgstr ""

#: lib/CPANPLUS/Shell/Default.pm:232
msgid "Here is a listing of your previous search result:"
msgstr ""

#. ($host)
#: lib/CPANPLUS/Configure/Setup.pm:1401
msgid "Host %1 already selected!"
msgstr ""

#: lib/CPANPLUS/Internals/Source.pm:372
msgid "Hybrid, written in perl with optional C code, no compiler needed"
msgstr ""

#: lib/CPANPLUS/Configure/Setup.pm:581
msgid "I am NOT going to use Storable."
msgstr ""

#. ($loc)
#: lib/CPANPLUS/Configure/Setup.pm:145
msgid "I can not write to %1, I don't have permission."
msgstr ""

#: lib/CPANPLUS/Configure/Setup.pm:904
msgid "I can't seem to write in this directory."
msgstr ""

#. ($pgm_name)
#: lib/CPANPLUS/Configure/Setup.pm:1118
msgid "I couldn't find '%1' in your PATH."
msgstr ""

#. ('sudo', 'make install')
#: lib/CPANPLUS/Configure/Setup.pm:1000
msgid "I found %1 in your path, would you like to use it for '%2'?"
msgstr ""

#: lib/CPANPLUS/Configure/Setup.pm:871
msgid "I see you already have a directory:"
msgstr ""

#: lib/CPANPLUS/Configure/Setup.pm:126
msgid "I see you already have this file. It is writable. Shall I overwrite it?"
msgstr ""

#. ($answer)
#. ($autdir)
#. ($moddir)
#: lib/CPANPLUS/Configure/Setup.pm:917 lib/CPANPLUS/Configure/Setup.pm:925
#: lib/CPANPLUS/Configure/Setup.pm:932
msgid "I wasn't able to create %1."
msgstr ""

#: lib/CPANPLUS/Configure/Setup.pm:462
msgid "I will ask permission to install prereqs."
msgstr ""

#: lib/CPANPLUS/Configure/Setup.pm:645
msgid "I will attempt to check module signatures."
msgstr ""

#: lib/CPANPLUS/Configure/Setup.pm:416
msgid "I will force installs."
msgstr ""

#: lib/CPANPLUS/Configure/Setup.pm:459
msgid "I will install prereqs."
msgstr ""

#: lib/CPANPLUS/Configure/Setup.pm:465
msgid "I will only build and not install prereqs."
msgstr ""

#: lib/CPANPLUS/Configure/Setup.pm:610
msgid "I will prompt you to report test results."
msgstr ""

#: lib/CPANPLUS/Configure/Setup.pm:578
msgid "I will use Storable if you have it."
msgstr ""

#: lib/CPANPLUS/Configure/Setup.pm:495
msgid "I will use md5 if you have it."
msgstr ""

#: lib/CPANPLUS/Configure/Setup.pm:720
msgid "I will use passive FTP."
msgstr ""

#: lib/CPANPLUS/Configure/Setup.pm:648
msgid "I won't attempt to check module signatures."
msgstr ""

#: lib/CPANPLUS/Configure/Setup.pm:389
msgid "I won't flush until you tell me to.  (It could get smelly in here! ;o)"
msgstr ""

#: lib/CPANPLUS/Configure/Setup.pm:419
msgid "I won't force installs."
msgstr ""

#: lib/CPANPLUS/Configure/Setup.pm:468
msgid "I won't install prereqs."
msgstr ""

#: lib/CPANPLUS/Configure/Setup.pm:614
msgid "I won't prompt you to report test results."
msgstr ""

#: lib/CPANPLUS/Configure/Setup.pm:498
msgid "I won't use md5 if you have it."
msgstr ""

#: lib/CPANPLUS/Configure/Setup.pm:723
msgid "I won't use passive FTP."
msgstr ""

#: lib/CPANPLUS/Configure/Setup.pm:386
msgid "I'll flush after every full module install."
msgstr ""

#: lib/CPANPLUS/Configure/Setup.pm:357
msgid "I'll try to be quiet."
msgstr ""

#. ($answer)
#: lib/CPANPLUS/Configure/Setup.pm:986
msgid "I'm sorry, '%1' is not a valid option, please try again"
msgstr ""

#. ($id, $self->{_id})
#: lib/CPANPLUS/Internals/Source.pm:639
msgid "IDs do not match: %1 != %2. Storage failed!"
msgstr ""

#: lib/CPANPLUS/Internals.pm:852 lib/CPANPLUS/Tools/Cmd.pm:206
msgid "IO::Select error"
msgstr ""

#: Makefile.PL:344
msgid "IPC::Run support"
msgstr ""

#: lib/CPANPLUS/Internals/Source.pm:350
msgid "Idea, listed to gain consensus or as a placeholder"
msgstr ""

#. ($key)
#: lib/CPANPLUS/Shell/Default.pm:332
msgid "Improper command '%1'. Usage:"
msgstr ""

#. ($mod, $subname)
#: lib/CPANPLUS/Internals.pm:429
msgid "Install of %1 failed in %2"
msgstr ""

#: lib/CPANPLUS/Shell/Default.pm:410
msgid "Installing"
msgstr ""

msgid "Installing %1 failed!"
msgstr ""

#. ($mod)
#: lib/CPANPLUS/Internals/Make.pm:388
msgid "Installing %1 to satisfy dependency"
msgstr ""

#. ($name)
#: lib/CPANPLUS/Backend.pm:255
msgid "Installing %2 failed!"
msgstr ""

#. ($name)
#: lib/CPANPLUS/Internals/Install.pm:346
msgid "Installing bundled module: %1"
msgstr ""

#. ($mod)
#: lib/CPANPLUS.pm:58
msgid "Installing of %1 failed"
msgstr ""

#. ($mod)
#: lib/CPANPLUS.pm:57
msgid "Installing of %1 successful"
msgstr ""

#. ($type)
#: lib/CPANPLUS/Configure.pm:203 lib/CPANPLUS/Configure.pm:230
msgid "Invalid method type: '%1'"
msgstr ""

#: lib/CPANPLUS/Configure/Setup.pm:1713
msgid "Invalid selection, please try again."
msgstr ""

#: lib/CPANPLUS/Tools/Term.pm:12
msgid "Invalid selection, please try again: "
msgstr ""

#: lib/CPANPLUS/Internals/Make.pm:636
msgid "Invalid start dir!"
msgstr ""

#. ($key, _who_was_it()
#: lib/CPANPLUS/Tools/Check.pm:71
msgid "Key '%1' is not a valid key for %2 provided by %3"
msgstr ""

#: lib/CPANPLUS/Internals/Source.pm:390
msgid "LGPL: \"GNU Lesser General Public License\" (previously known as \"GNU Library General Public License\")"
msgstr ""

#: Makefile.PL:328
msgid "LWP & CPAN test query"
msgstr ""

#: Makefile.PL:236
msgid "Let the installer probe for module dependencies?"
msgstr ""

#: Makefile.PL:338
msgid "Local file support"
msgstr ""

#: Makefile.PL:375
msgid "Localized messages"
msgstr ""

#: lib/CPANPLUS/Configure/Setup.pm:102
msgid "Location of the Configuration file [1]: "
msgstr ""

#. ($!)
#: lib/CPANPLUS/Internals/Make.pm:507
msgid "MAKE INSTALL failed! - %1"
msgstr ""

#. ($!)
#: lib/CPANPLUS/Internals/Make.pm:482
msgid "MAKE TEST failed! - %1"
msgstr ""

#. ($!)
#: lib/CPANPLUS/Internals/Make.pm:456
msgid "MAKE failed! - %1"
msgstr ""

#: Makefile.PL:284
msgid "MD5 checksum"
msgstr ""

#. ($modobj->package)
#: lib/CPANPLUS/Internals/Install.pm:547
msgid "MD5 sums did not add up for %1"
msgstr ""

#: lib/CPANPLUS/Internals/Source.pm:361
msgid "Mailing-list"
msgstr ""

#. ($dir, cwd()
#: lib/CPANPLUS/Dist/PPM.pm:591 lib/CPANPLUS/Internals/Make.pm:139
msgid "Make couldn't chdir to %1! I am in %2 now"
msgstr ""

msgid "Makefile already exists, not running 'perl Makefile.PL' again, unless you force!"
msgstr ""

#. ($mod)
#: lib/CPANPLUS/Backend.pm:462
msgid "Making %1 failed!"
msgstr ""

#. ($_)
#: lib/CPANPLUS/Internals/Source.pm:754
msgid "Malformed CHECKSUM line: %1"
msgstr ""

#: Makefile.PL:141
msgid "Manually configure CPANPLUS based on previous settings?"
msgstr ""

#: lib/CPANPLUS/Internals/Source.pm:355
msgid "Mature (no rigorous definition)"
msgstr ""

msgid "Missing key %1"
msgstr ""

#. ($name)
#: lib/CPANPLUS/Backend.pm:216
msgid "Module %1 already up to date; "
msgstr ""

#. ($mod)
#: lib/CPANPLUS/Internals/Search.pm:442
msgid "Module %1 not installed! Can not validate!"
msgstr ""

#: Makefile.PL:296
msgid "Module::Build distribution"
msgstr ""

#. ($current, $target)
#: lib/CPANPLUS/Dist/PPM.pm:432
msgid "Moving %1 to %2"
msgstr ""

#: Makefile.PL:320
msgid "Net::FTP support"
msgstr ""

#. ($mod)
#: lib/CPANPLUS/Shell/Default.pm:604
msgid "No README found for %1"
msgstr ""

#: lib/CPANPLUS/Shell/Default.pm:597
msgid "No README found for your query"
msgstr ""

#: lib/CPANPLUS/Shell/Default.pm:556
msgid "No authors found for your query"
msgstr ""

#: lib/CPANPLUS/Internals.pm:490
msgid "No cache limit entered, ignoring dir size"
msgstr ""

#. ($mod)
#: lib/CPANPLUS/Shell/Default.pm:532
msgid "No details for %1 - it's probably outdated."
msgstr ""

#. ($mod)
#: lib/CPANPLUS/Internals/Install.pm:422
msgid "No directory tree found for %1!"
msgstr ""

#. ($mod)
#: lib/CPANPLUS/Internals/Install.pm:415
msgid "No files found for %1!"
msgstr ""

#: lib/CPANPLUS.pm:71
msgid "No module specified!"
msgstr ""

#. ($file)
#: lib/CPANPLUS/Internals/Install.pm:283
msgid "No modules mentioned in %1"
msgstr ""

#: lib/CPANPLUS/Shell/Default.pm:265
msgid "No modules to check."
msgstr ""

#: lib/CPANPLUS/Internals/Fetch.pm:84
msgid "No remote file given to download!"
msgstr ""

#: lib/CPANPLUS/Shell/Default.pm:494
msgid "No reports available for this distribution."
msgstr ""

#: lib/CPANPLUS/Shell/Default.pm:911
msgid "No search was done yet!"
msgstr ""

#: lib/CPANPLUS/Shell/Default.pm:233
msgid "No search was done yet."
msgstr ""

#. ($AUTOLOAD)
#: lib/CPANPLUS/Internals/Module/Status.pm:49 lib/CPANPLUS/Shell.pm:323
msgid "No such method %1"
msgstr ""

#. ($mod)
#: lib/CPANPLUS/Shell/Default.pm:923 lib/CPANPLUS/Shell/Default.pm:938
msgid "No such module: %1"
msgstr ""

#. ($mod)
#: lib/CPANPLUS/Internals/Make.pm:345
msgid "No such module: %1, cannot satisfy dependency"
msgstr ""

#. ($pkg)
#: bin/cpansmoke:120
msgid "No such module: %1, skipping.\\n"
msgstr ""

#: lib/CPANPLUS/Configure/Setup.pm:1591
msgid "No valid hostname entered!"
msgstr ""

#: lib/CPANPLUS/Configure/Setup.pm:1584
msgid "No valid path or scheme entered!"
msgstr ""

#: lib/CPANPLUS/Backend.pm:909
msgid "None"
msgstr ""

#: lib/CPANPLUS/Backend.pm:915 lib/CPANPLUS/Backend.pm:917
msgid "None given"
msgstr ""

#: lib/CPANPLUS/Internals/Source.pm:364
msgid "None known, try comp.lang.perl.modules"
msgstr ""

msgid "Now, please type '%1' to test, and %2 to install."
msgstr ""

#. ("$Config{make} test", "$Config{make} install")
#: Makefile.PL:211
msgid "Now, please type '%1' to test, and '%2' to install."
msgstr ""

#: lib/CPANPLUS/Configure/Setup.pm:152
msgid "OK, I will save your Configure file to:"
msgstr ""

#: lib/CPANPLUS/Internals/Source.pm:383
msgid "Object oriented using blessed references and/or inheritance"
msgstr ""

#: lib/CPANPLUS/Configure/Setup.pm:412 lib/CPANPLUS/Configure/Setup.pm:455
#: lib/CPANPLUS/Configure/Setup.pm:491 lib/CPANPLUS/Configure/Setup.pm:606
#: lib/CPANPLUS/Configure/Setup.pm:641
msgid "Ok, "
msgstr ""

#: Makefile.PL:153
msgid "Okay, existing settings are preserved."
msgstr ""

#: Makefile.PL:142
msgid "Old settings detected. Do you want to modify it?"
msgstr ""

#: lib/CPANPLUS/Shell/Default.pm:654
msgid "Opening shell for module"
msgstr ""

#: Makefile.PL:315
msgid "PAR distribution"
msgstr ""

#: Makefile.PL:290
msgid "PGP signatures"
msgstr ""

#: Makefile.PL:303
msgid "PPM distribution"
msgstr ""

#. ($name, $current_flags)
#: lib/CPANPLUS/Configure/Setup.pm:1179
msgid "Parameters for %1 [%2]: "
msgstr ""

msgid "Parameters for %1: "
msgstr ""

#: lib/CPANPLUS/Shell/Default.pm:664
msgid "Perhaps you need to re-run your setup?"
msgstr ""

#: lib/CPANPLUS/Internals/Source.pm:370
msgid "Perl-only, no compiler needed, should be platform independent"
msgstr ""

#: lib/CPANPLUS/Configure/Setup.pm:1086 lib/CPANPLUS/Configure/Setup.pm:768
#: lib/CPANPLUS/Configure/Setup.pm:863
msgid "Please choose 1, 2, or 3 [1]: "
msgstr ""

#. ($default)
#: lib/CPANPLUS/Configure/Setup.pm:1323
msgid "Please choose a continent [%1]: "
msgstr ""

#. ($default)
#: lib/CPANPLUS/Configure/Setup.pm:1353
msgid "Please choose a country [%1]: "
msgstr ""

#: lib/CPANPLUS/Configure/Setup.pm:900
msgid "Please choose a different location: "
msgstr ""

#. ($default)
#: lib/CPANPLUS/Configure/Setup.pm:1391
msgid "Please choose a host [%1]: "
msgstr ""

#: lib/CPANPLUS/Configure/Setup.pm:1276
msgid "Please choose an option "
msgstr ""

msgid "Please choose an option [%1]: "
msgstr ""

#: Makefile.PL:65
msgid "Please follow the instruction in README to install nmake first."
msgstr ""

#: Makefile.PL:181
msgid "Please follow the instruction in README to install nmake manually."
msgstr ""

#: lib/CPANPLUS/Configure/Setup.pm:1070 lib/CPANPLUS/Configure/Setup.pm:757
#: lib/CPANPLUS/Configure/Setup.pm:852
msgid "Please pick one [1]: "
msgstr ""

#: lib/CPANPLUS/Configure/Setup.pm:1119
msgid "Please tell me where I can find it: "
msgstr ""

#: lib/CPANPLUS/Internals/Make.pm:336
msgid "Prereqs are found, but not allowed to install! Returning list of prereqs"
msgstr ""

#. ($target)
#: lib/CPANPLUS/Shell/Default.pm:435
msgid "Problem %tense(%1,present) one or more modules"
msgstr ""

#: lib/CPANPLUS/Shell/Default.pm:469
msgid "Problem downloading one or more files"
msgstr ""

#: lib/CPANPLUS/Shell/Default.pm:637
msgid "Problem uninstalling one or more modules"
msgstr ""

#. ($source, $!)
#: lib/CPANPLUS/Dist/RPM.pm:244
msgid "RPM of %1 could not be installed: %2"
msgstr ""

#. ($source, $!)
#: lib/CPANPLUS/Dist/RPM.pm:241
msgid "RPM of %1 failed with : %2"
msgstr ""

#: Makefile.PL:359
msgid "ReadLine support"
msgstr ""

#. ($rl_avail)
#: lib/CPANPLUS/Shell.pm:145
msgid "ReadLine support %1."
msgstr ""

#. ($mod)
#: lib/CPANPLUS/Internals/Make.pm:350
msgid "Recursive dependency detected in %1, skipping"
msgstr ""

#: lib/CPANPLUS/Internals/Source.pm:354
msgid "Released"
msgstr ""

msgid "Report %1's testing result (%2)? [y/N]: "
msgstr ""

#. ($args->{dist}, uc($args->{grade})
#: lib/CPANPLUS/Shell/Default.pm:990
msgid "Report %1's testing result (%2)?: "
msgstr ""

#: lib/CPANPLUS/Configure/Setup.pm:600
msgid "Report tests results?"
msgstr ""

#: Makefile.PL:175
msgid "Required executable 'nmake' not found. Install it?"
msgstr ""

msgid "Required option '%1' is not provided for %2"
msgstr ""

#. ($key, _who_was_it()
#: lib/CPANPLUS/Tools/Check.pm:53
msgid "Required option '%1' is not provided for %2 by %3"
msgstr ""

#. ($stored)
#: lib/CPANPLUS/Internals/Source.pm:216 lib/CPANPLUS/Internals/Source.pm:285
#: lib/CPANPLUS/Internals/Source.pm:97
msgid "Retrieving %1"
msgstr ""

#. ("@cmd")
#: lib/CPANPLUS/Internals.pm:741
msgid "Running [%1]..."
msgstr ""

#. ($host)
#: lib/CPANPLUS/Configure/Setup.pm:1410
msgid "Selected %1"
msgstr ""

#. ($dist)
#: lib/CPANPLUS/Internals/Report.pm:266
msgid "Sending report for %1"
msgstr ""

#: lib/CPANPLUS/Configure/Setup.pm:344
msgid "Should I be verbose?"
msgstr ""

#: lib/CPANPLUS/Configure/Setup.pm:873
msgid "Should I use it? [Y/n]: "
msgstr ""

#. ($file)
#: lib/CPANPLUS/Internals/Install.pm:134 lib/CPANPLUS/Internals/Install.pm:153
msgid "Signature checking failed for %1"
msgstr ""

#: Makefile.PL:88
msgid "Skipping setup; advanced tests will be disabled."
msgstr ""

#: lib/CPANPLUS/Internals/Make.pm:536
msgid "Some prerequisites failed - skip sending test reports."
msgstr ""

#: lib/CPANPLUS/Shell/Default.pm:1026
msgid "Stack printed successfully"
msgstr ""

#: lib/CPANPLUS/Internals/Source.pm:356
msgid "Standard, supplied with Perl 5"
msgstr ""

#: lib/CPANPLUS/Internals/Source.pm:388
msgid "Standard-Perl: user may choose between GPL and Artistic"
msgstr ""

#. ($target, $key)
#: lib/CPANPLUS/Shell/Default.pm:427
msgid "Successfully %tense(%1,past) %2"
msgstr ""

#. ($key)
#: lib/CPANPLUS/Shell/Default.pm:463
msgid "Successfully fetched %1"
msgstr ""

#. ($dist)
#: lib/CPANPLUS/Internals/Report.pm:271
msgid "Successfully sent report for %1."
msgstr ""

#. ($DEFAULT)
#: lib/CPANPLUS/Shell.pm:63
msgid "Switching to the default shell %1"
msgstr ""

#: Makefile.PL:370
msgid "Terminal size support"
msgstr ""

#: lib/CPANPLUS/Shell/Default.pm:410
msgid "Testing"
msgstr ""

#. ($name)
#: lib/CPANPLUS/Backend.pm:254
msgid "Testing %2 failed!"
msgstr ""

#. (($pkg =~ /[^\w:]/ ? $dist : "$pkg ($dist)
#: bin/cpansmoke:132
msgid "Testing: %1\\n"
msgstr ""

#. ($@)
#. ($!)
#: lib/CPANPLUS/Configure/Setup.pm:918 lib/CPANPLUS/Configure/Setup.pm:926
#: lib/CPANPLUS/Configure/Setup.pm:933
msgid "The error I got was %1"
msgstr ""

msgid "The modules in the CPAN archives are protected with md5 checksums."
msgstr ""

#. ($ref)
#: lib/CPANPLUS/Internals.pm:205
msgid "The object you passed has the wrong ref type: '%1'"
msgstr ""

#: lib/CPANPLUS/Shell/Default.pm:191
msgid "This may take a while..."
msgstr ""

#: Makefile.PL:384
msgid "Tk Shell"
msgstr ""

msgid "Trying to get %1 from %2"
msgstr ""

#. ($path->{'remote'},                             ($uri->{host} || loc('local disk')
#: lib/CPANPLUS/Internals/Fetch.pm:175
msgid "Trying to get %1 from %2 via %3"
msgstr ""

#: lib/CPANPLUS/Internals/Report.pm:194
msgid "UNKNOWN grades for Bundles are normal; skipped."
msgstr ""

#: lib/CPANPLUS/Internals/Install.pm:538
msgid "Unable to fetch checksums file! Can not verify this distribution is safe!"
msgstr ""

msgid "Unable to identify caller"
msgstr ""

#. ($ppd, $PPM::PPMERR)
#. ($makefile, '')
#: lib/CPANPLUS/Dist/PPM.pm:94 lib/CPANPLUS/Dist/Ports.pm:96
msgid "Unable to install %1: %2"
msgstr ""

#. ($file)
#: lib/CPANPLUS/Internals/Extract.pm:340
msgid "Unable to read %1"
msgstr ""

#. ($ppd, $PPM::PPMERR)
#: lib/CPANPLUS/Dist/PPM.pm:171
msgid "Unable to uninstall %1: %2"
msgstr ""

#: lib/CPANPLUS/Internals/Source.pm:434
msgid "Unable to update source, attempting to get away with using old source file!"
msgstr ""

#: Makefile.PL:276
msgid "Uncompress .gz files"
msgstr ""

#: Makefile.PL:267
msgid "Uncompress .tar files"
msgstr ""

#. ($mod)
#: lib/CPANPLUS/Shell/Default.pm:631
msgid "Uninstalled %1 successfully"
msgstr ""

#: lib/CPANPLUS/Shell/Default.pm:619
msgid "Uninstalling"
msgstr ""

#. ($mod)
#: lib/CPANPLUS/Shell/Default.pm:632
msgid "Uninstalling %1 failed"
msgstr ""

#: lib/CPANPLUS/Backend.pm:923
msgid "Unknown"
msgstr ""

#. ($key)
#: lib/CPANPLUS/Shell/Default.pm:750
msgid "Unknown command '%1'. Usage:"
msgstr ""

#: lib/CPANPLUS/Configure.pm:240
msgid "Unknown error..."
msgstr ""

#. ($file)
#: lib/CPANPLUS/Internals/Extract.pm:132
msgid "Unknown file format for %1"
msgstr ""

#. ($mod)
#: lib/CPANPLUS.pm:49 lib/CPANPLUS.pm:82
msgid "Unknown module '%1'"
msgstr ""

#. ($file)
#: lib/CPANPLUS/Internals/Extract.pm:260
msgid "Untarring %1"
msgstr ""

#. ($file)
#: lib/CPANPLUS/Internals/Extract.pm:329 lib/CPANPLUS/Internals/Extract.pm:365
msgid "Unzipping %1"
msgstr ""

#. ($file)
#: lib/CPANPLUS/Internals/Source.pm:524
msgid "Updating source file '%1'"
msgstr ""

#: lib/CPANPLUS/Configure/Setup.pm:568
msgid "Use Storable?"
msgstr ""

#: lib/CPANPLUS/Configure/Setup.pm:705
msgid "Use passive FTP?"
msgstr ""

#: lib/CPANPLUS/Configure/Setup.pm:485
msgid "Use the md5 checksums?"
msgstr ""

#: lib/CPANPLUS/Internals/Source.pm:363
msgid "Usenet newsgroup comp.lang.perl.modules"
msgstr ""

#. ($1)
#: lib/CPANPLUS/Internals/Make.pm:802
msgid "Warning: PREREQ_PM mentions %1 more than once, last mention wins!"
msgstr ""

#. ($pgm, $pgm_name)
#: lib/CPANPLUS/Configure/Setup.pm:1074
msgid "Where can I find your '%1' executable? [%2]: "
msgstr ""

#. ($pgm)
#: lib/CPANPLUS/Configure/Setup.pm:1094
msgid "Where can I find your '%1' executable?: "
msgstr ""

#: lib/CPANPLUS/Configure/Setup.pm:894
msgid "Where shall I put it then?: "
msgstr ""

#: lib/CPANPLUS/Configure/Setup.pm:530
msgid "Which CPANPLUS 'shell' do you want to use? "
msgstr ""

#. ($pgm)
#: lib/CPANPLUS/Configure/Setup.pm:1108
msgid "Without your '%1' executable I can't function!"
msgstr ""

#: lib/CPANPLUS/Shell.pm:299
msgid "Would you like me to install it?"
msgstr ""

msgid "Would you like me to install it? [Y/n]: "
msgstr ""

#. ($file, $Archive::Tar::error)
#: lib/CPANPLUS/Dist/PPM.pm:380
msgid "Writing %1 failed with error: %2"
msgstr ""

#: lib/CPANPLUS/Internals/Source.pm:488
msgid "Writing state information back to disk. This may take a little while."
msgstr ""

#. ($mods)
#: lib/CPANPLUS/Dist/PPM.pm:109 lib/CPANPLUS/Dist/PPM.pm:186
msgid "You are missing at least one of these modules: %1"
msgstr ""

#: lib/CPANPLUS/Configure/Setup.pm:354
msgid "You asked for it!"
msgstr ""

#: lib/CPANPLUS/Configure/Setup.pm:773
msgid "You did not enter a valid email address, please try again!"
msgstr ""

#. ("@_", $modobj)
#: lib/CPANPLUS/Internals/Install.pm:62
msgid "You did not pass a proper module object! %1 (%2)"
msgstr ""

#. (.                         "Assuming %2 is trustworthy", "Module::Signature", $dir)
#. (.                         "Assuming %2 is trustworthy", "Module::Signature", $modobj->package)
#: lib/CPANPLUS/Internals/Install.pm:598 lib/CPANPLUS/Internals/Install.pm:638
msgid "You do not have %1! Please install it as soon as possible! "
msgstr ""

#: lib/CPANPLUS/Dist/PPM.pm:641
msgid "You do not have Archive::Zip installed -- can not create .zip distribution"
msgstr ""

#: lib/CPANPLUS/Internals/Search.pm:416 lib/CPANPLUS/Internals/Search.pm:460
msgid "You do not have ExtUtils::Installed available!"
msgstr ""

#: lib/CPANPLUS/Internals/Search.pm:376
msgid "You do not have File::Spec installed!"
msgstr ""

#. ("Archive::Tar")
#. ("Archive::Zip")
#. ("Compress::Zlib")
#: lib/CPANPLUS/Internals/Extract.pm:293 lib/CPANPLUS/Internals/Extract.pm:398
#: lib/CPANPLUS/Internals/Extract.pm:496
msgid "You don't have %1! Please install it as soon as possible!"
msgstr ""

#. ("Digest::MD5", $modobj->package)
#: lib/CPANPLUS/Internals/Install.pm:556
msgid "You don't have %1! Please install it as soon as possible! Assuming %2 is trustworthy"
msgstr ""

#. ("Digest::MD5")
#: lib/CPANPLUS/Dist/Ports.pm:299
msgid "You don't have %1, cannot continue!"
msgstr ""

#: lib/CPANPLUS/Configure/Setup.pm:1293
msgid "You have *NO* hosts selected! This will probably cause problems!"
msgstr ""

#. ($dist)
#: lib/CPANPLUS/Internals/Report.pm:378
msgid "You have already sent a report for %1, skipping.\\n"
msgstr ""

#: Makefile.PL:215
msgid "You may need to do that as the 'root' user to install dependencies."
msgstr ""

#: lib/CPANPLUS.pm:39 lib/CPANPLUS.pm:77
msgid "You passed an object. Use CPANPLUS::Backend for OO style interaction"
msgstr ""

#. ($name)
#: lib/CPANPLUS/Configure/Setup.pm:1185
msgid "Your %1 flags are now:"
msgstr ""

#. ($pgm)
#: lib/CPANPLUS/Configure/Setup.pm:1129
msgid "Your '%1' program has been set to:"
msgstr ""

#: lib/CPANPLUS/Configure/Setup.pm:781
msgid "Your 'email' is now:"
msgstr ""

#: lib/CPANPLUS/Configure/Setup.pm:954
msgid "Your CPAN++ build and cache directory has been set to:"
msgstr ""

#: lib/CPANPLUS/Configure/Setup.pm:208 lib/CPANPLUS/Shell/Default.pm:362
msgid "Your CPAN++ configuration info has been saved!"
msgstr ""

#: lib/CPANPLUS/Configure/Setup.pm:322
msgid "Your additional libs are now:"
msgstr ""

#: lib/CPANPLUS/Configure/Setup.pm:985
msgid "Your command line shell has been set to:"
msgstr ""

#: lib/CPANPLUS/Shell/Default.pm:663
msgid "Your config does not specify a subshell!"
msgstr ""

#. ($name)
#: lib/CPANPLUS/Configure/Setup.pm:1162
msgid "Your current %1 flags are:"
msgstr ""

#: lib/CPANPLUS/Configure/Setup.pm:1471
msgid "Your current hosts are:"
msgstr ""

#. ($DEFAULT, $err)
#: lib/CPANPLUS/Shell.pm:54
msgid "Your default shell %1 is not available: %2"
msgstr ""

#: lib/CPANPLUS/Configure/Setup.pm:977
msgid "Your favorite command line shell? "
msgstr ""

#: lib/CPANPLUS/Shell/Default.pm:746
msgid "Your search generated no results"
msgstr ""

#. ($cpan_home)
#: lib/CPANPLUS/Configure/Setup.pm:880
msgid "[%1]: "
msgstr ""

#: lib/CPANPLUS/Shell/Default.pm:1050
msgid "[General]"
msgstr ""

#: lib/CPANPLUS/Shell/Default.pm:1069
msgid "[Local Administration]"
msgstr ""

#: lib/CPANPLUS/Shell/Default.pm:1060
msgid "[Operations]"
msgstr ""

#: lib/CPANPLUS/Shell/Default.pm:1054
msgid "[Search]"
msgstr ""

#: lib/CPANPLUS/Tools/Module.pm:381
msgid "[THIS MAY BE A PROBLEM!]"
msgstr ""

#: lib/CPANPLUS/Shell.pm:137
msgid "available (try 'i Term::ReadLine::Perl')"
msgstr ""

#: lib/CPANPLUS/Configure/Setup.pm:1350
msgid "back to continents"
msgstr ""

#: lib/CPANPLUS/Configure/Setup.pm:1385
msgid "back to countries"
msgstr ""

#: lib/CPANPLUS/Configure/Setup.pm:1320
msgid "back to main"
msgstr ""

#. ($captured)
#: lib/CPANPLUS/Internals/Fetch.pm:1018 lib/CPANPLUS/Internals/Fetch.pm:1083
#: lib/CPANPLUS/Internals/Fetch.pm:739 lib/CPANPLUS/Internals/Fetch.pm:816
#: lib/CPANPLUS/Internals/Fetch.pm:883 lib/CPANPLUS/Internals/Fetch.pm:958
msgid "command failed: %1"
msgstr ""

#: lib/CPANPLUS/Backend.pm:218
msgid "continuing anyway."
msgstr ""

#. ($!)
#: lib/CPANPLUS/Internals/Extract.pm:475
msgid "could not call gzip: %1"
msgstr ""

#. ($!)
#: lib/CPANPLUS/Internals/Extract.pm:269
msgid "could not call tar/gzip: %1"
msgstr ""

#. ($!)
#: lib/CPANPLUS/Internals/Extract.pm:374
msgid "could not call unzip: %1"
msgstr ""

#. ($base)
#: lib/CPANPLUS/Internals/Extract.pm:116
msgid "could not cd into %1"
msgstr ""

#. ($remote, $args->{uri}->{host})
#: lib/CPANPLUS/Internals/Fetch.pm:583
msgid "could not fetch %1 from %2"
msgstr ""

#. ($args->{uri}->{host})
#: lib/CPANPLUS/Internals/Fetch.pm:557
msgid "could not log in to %1"
msgstr ""

#. ($file)
#: lib/CPANPLUS/Internals/Install.pm:276
msgid "could not obtain required modules from %1"
msgstr ""

#. ($cmd, $!)
#: lib/CPANPLUS/Shell.pm:206
msgid "could not pipe to %1: %2\\n"
msgstr ""

#. ($dir, $!)
#: lib/CPANPLUS/Internals/Install.pm:459
msgid "could not remove %1: %2"
msgstr ""

#. ($stored)
#. ($file)
#: lib/CPANPLUS/Internals/Source.pm:180 lib/CPANPLUS/Internals/Source.pm:246
#: lib/CPANPLUS/Internals/Source.pm:330 lib/CPANPLUS/Internals/Source.pm:494
msgid "could not store %1!"
msgstr ""

#. ($aref->[0], $!)
#. ($file, $!)
#: lib/CPANPLUS/Internals.pm:538 lib/CPANPLUS/Internals/Install.pm:435
msgid "could not unlink %1: %2"
msgstr ""

#. ($!)
#: lib/CPANPLUS/Internals.pm:782 lib/CPANPLUS/Tools/Cmd.pm:134
msgid "couldn't dup STDERR: %1"
msgstr ""

#. ($!)
#: lib/CPANPLUS/Internals.pm:777 lib/CPANPLUS/Tools/Cmd.pm:129
msgid "couldn't dup STDOUT: %1"
msgstr ""

#: lib/CPANPLUS/Internals.pm:350
msgid "couldn't locate current dir!"
msgstr ""

#. ($!)
#: lib/CPANPLUS/Internals.pm:784 lib/CPANPLUS/Tools/Cmd.pm:136
msgid "couldn't reopen STDERR: %1"
msgstr ""

#. ($!)
#: lib/CPANPLUS/Internals.pm:779 lib/CPANPLUS/Tools/Cmd.pm:131
msgid "couldn't reopen STDOUT: %1"
msgstr ""

#. ($!)
#: lib/CPANPLUS/Internals.pm:791 lib/CPANPLUS/Tools/Cmd.pm:143
msgid "couldn't restore STDERR: %1"
msgstr ""

#. ($!)
#: lib/CPANPLUS/Internals.pm:789 lib/CPANPLUS/Tools/Cmd.pm:141
msgid "couldn't restore STDOUT: %1"
msgstr ""

#. ($@)
#: lib/CPANPLUS/Internals.pm:822
msgid "couldn't spawn process: %1"
msgstr ""

#. ($dir, cwd()
#. ($path, cwd()
#: lib/CPANPLUS/Dist/PAR.pm:158 lib/CPANPLUS/Dist/PPM.pm:261
#: lib/CPANPLUS/Dist/PPM.pm:286 lib/CPANPLUS/Dist/Ports.pm:204
msgid "create() couldn't chdir to %1! I am in %2 now"
msgstr ""

msgid "curl not available"
msgstr ""

#: lib/CPANPLUS/Configure/Setup.pm:1273 lib/CPANPLUS/Configure/Setup.pm:1321
#: lib/CPANPLUS/Configure/Setup.pm:1351 lib/CPANPLUS/Configure/Setup.pm:1387
msgid "custom host"
msgstr ""

#: lib/CPANPLUS/Shell.pm:139
msgid "disabled"
msgstr ""

#: Makefile.PL:495
msgid "done!"
msgstr ""

msgid "done."
msgstr ""

#: lib/CPANPLUS/Shell.pm:135
msgid "enabled"
msgstr ""

#. ($dir, $!)
#: lib/CPANPLUS/Internals/Install.pm:253
msgid "error opening dir %1: %2"
msgstr ""

#. ($file)
#: lib/CPANPLUS/Backend.pm:407
msgid "extracting %1 failed!"
msgstr ""

msgid "failed (%1)!"
msgstr ""

#. ($!)
#: Makefile.PL:495
msgid "failed! (%1)"
msgstr ""

#. ($name)
#: lib/CPANPLUS/Backend.pm:358
msgid "fetching %1 failed!"
msgstr ""

#. ($name)
#: lib/CPANPLUS/Backend.pm:1069
msgid "fetching readme for %1 failed!"
msgstr ""

#: lib/CPANPLUS/Configure/Setup.pm:1384
msgid "finish"
msgstr ""

#. ($!)
#. ($@)
#: lib/CPANPLUS/Internals/Fetch.pm:484 lib/CPANPLUS/Internals/Fetch.pm:551
msgid "ftp creation failed: %1"
msgstr ""

#: lib/CPANPLUS/Internals/Source.pm:380
msgid "hybrid, object and function interfaces available"
msgstr ""

#: lib/CPANPLUS/I18N/CPANPLUS.pot:1872
msgid "local disk"
msgstr ""

msgid "lynx not available"
msgstr ""

msgid "ncftp not available"
msgstr ""

#: lib/CPANPLUS/Internals/Fetch.pm:866
msgid "ncftp only works with ftp capable hosts"
msgstr ""

msgid "ncftpget not available"
msgstr ""

#: lib/CPANPLUS/Internals/Fetch.pm:713
msgid "ncftpget only works with ftp capable hosts"
msgstr ""

#. ($dir)
#: lib/CPANPLUS/Internals/Install.pm:295
msgid "no .pm files found in %1!"
msgstr ""

#: lib/CPANPLUS/Internals/Source.pm:381
msgid "no interface at all (huh?)"
msgstr ""

#: lib/CPANPLUS/Configure/Setup.pm:1272
msgid "official cpan mirror list"
msgstr ""

#: lib/CPANPLUS/Internals/Source.pm:393
msgid "other (but distribution allowed without restrictions)"
msgstr ""

#: lib/CPANPLUS/Internals/Source.pm:374
msgid "perl and another language other than C or C++"
msgstr ""

#: lib/CPANPLUS/Internals/Source.pm:379
msgid "plain Functions, no references used"
msgstr ""

#: lib/CPANPLUS/Configure/Setup.pm:1271 lib/CPANPLUS/Configure/Setup.pm:1319
#: lib/CPANPLUS/Configure/Setup.pm:1349
msgid "quit"
msgstr ""

#. ($dir)
#: lib/CPANPLUS/Internals/Install.pm:450
msgid "removing %1"
msgstr ""

#: lib/CPANPLUS/Internals/Source.pm:382
msgid "some use of unblessed References or ties"
msgstr ""

#: lib/CPANPLUS/Shell.pm:141
msgid "suppressed"
msgstr ""

#: lib/CPANPLUS/Shell.pm:143
msgid "suppressed in batch mode"
msgstr ""

#. ($file, $Compress::Zlib::gzerrno)
#: lib/CPANPLUS/Internals/Extract.pm:440
msgid "unable to open %1: %2"
msgstr ""

#: lib/CPANPLUS/Internals/Source.pm:351
msgid "under construction but pre-alpha (not yet released)"
msgstr ""

#. ($key)
#: lib/CPANPLUS/Backend.pm:849
msgid "unknown key: %1"
msgstr ""

#. ($mod->package)
#: lib/CPANPLUS/Internals/Search.pm:299
msgid "unknown package %1"
msgstr ""

#. ($file)
#: lib/CPANPLUS/Internals/Install.pm:430
msgid "unlinking %1"
msgstr ""

#. ($!)
#: lib/CPANPLUS/Internals/Extract.pm:390
msgid "unzip error: %1"
msgstr ""

#: lib/CPANPLUS/Configure/Setup.pm:1274 lib/CPANPLUS/Configure/Setup.pm:1386
msgid "view list"
msgstr ""

msgid "wget not available"
msgstr ""

#: lib/CPANPLUS/Backend.pm:217
msgid "won't install without force!"
msgstr ""