=encoding euc-jp =head1 NAME =begin original Win32::OLE::NLS - OLE National Language Support =end original Win32::OLE::NLS - OLE 各国語サポート =head1 SYNOPSIS missing =head1 DESCRIPTION =begin original This module provides access to the national language support features in the F. =end original このモジュールは F の各国語サポート機能へのアクセスを提供します。 =head2 Functions (関数) =over 8 =item CompareString(LCID,FLAGS,STR1,STR2) =begin original Compare STR1 and STR2 in the LCID locale. FLAGS indicate the character traits to be used or ignored when comparing the two strings. =end original LCID ロケールで STR1 と STR2 を比較します。 FLAGS は二つの文字列を比較する際に使用される、あるいは無視される文字の 特徴を示します。 =begin original NORM_IGNORECASE Ignore case NORM_IGNOREKANATYPE Ignore hiragana/katakana character differences NORM_IGNORENONSPACE Ignore accents, diacritics, and vowel marks NORM_IGNORESYMBOLS Ignore symbols NORM_IGNOREWIDTH Ignore character width =end original NORM_IGNORECASE 大文字と小文字を区別しない NORM_IGNOREKANATYPE ひらがなとカタカナを区別しない NORM_IGNORENONSPACE アクセント、付加記号、発音記号を無視する NORM_IGNORESYMBOLS 記号を無視する NORM_IGNOREWIDTH 文字列の幅を無視する =begin original Possible return values are: =end original あり得る戻り値は以下の通りです: =begin original 0 Function failed 1 STR1 is less than STR2 2 STR1 is equal to STR2 3 STR1 is greater than STR2 =end original 0 関数が失敗 1 STR1 は STR2 よりも小さい 2 STR1 は STR2 と同じ 3 STR1 は STR2 よりも大きい =begin original Note that you can subtract 2 from the return code to get values comparable to the C operator. =end original C 演算子と比較できる値を取得するために、戻り値から 2 を引くことが できることに注意してください。 =item LCMapString(LCID,FLAGS,STR) =begin original LCMapString translates STR using LCID dependent translation. Flags contains a combination of the following options: =end original LCMapString は LCID に依存した変換で STR を変換します。 フラグには以下のオプションの組み合わせが入ります: LCMAP_LOWERCASE 小文字化 LCMAP_UPPERCASE 大文字化 LCMAP_HALFWIDTH 半角化 LCMAP_FULLWIDTH 全角化 LCMAP_HIRAGANA ひらなが化 LCMAP_KATAKANA カタカナ化 LCMAP_SORTKEY 正規化されたワイド文字のソートキーを作成 =begin original The following normalization options can be combined with C: =end original 以下の正規化オプションを LCMAP_SORTKEY に組み合わせることができます: =begin original NORM_IGNORECASE Ignore case NORM_IGNOREKANATYPE Ignore hiragana/katakana character differences NORM_IGNORENONSPACE Ignore accents, diacritics, and vowel marks NORM_IGNORESYMBOLS Ignore symbols NORM_IGNOREWIDTH Ignore character width =end original NORM_IGNORECASE 大文字と小文字を区別しない NORM_IGNOREKANATYPE ひらがなとカタカナを区別しない NORM_IGNORENONSPACE アクセント、付加記号、発音記号を無視する NORM_IGNORESYMBOLS 記号を無視する NORM_IGNOREWIDTH 文字列の幅を無視する =begin original The return value is the translated string. =end original 戻り値は変換された文字列です。 =item GetLocaleInfo(LCID,LCTYPE) =begin original Retrieve locale setting LCTYPE from the locale specified by LCID. Use LOCALE_NOUSEROVERRIDE | LCTYPE to always query the locale database. Otherwise user changes to C through the windows control panel take precedence when retrieving values for the system default locale. See the documentation below for a list of valid LCTYPE values. =end original ロケール設定 LCTYPE を LCID で指定されたロケールから取り出します。 ロケールデータベースに問い合わせるためには常に LOCALE_NOUSEROVERRIDE | LCTYPEを使ってください。 そうでなければ値を取り出す際に、Windows コントロールパネルを通じて ユーザによる C に変更が、システムデフォルトロケールよりも 優先されます。 下記の適切な LCTYPE 値のリストについての文章をご覧ください。 =begin original The return value is the contents of the requested locale setting. =end original 戻り値は要求されたロケール設定の内容です。 =item GetStringType(LCID,TYPE,STR) =begin original Retrieve type information from locale LCID about each character in STR. The requested TYPE can be one of the following 3 levels: =end original ロケール LCID から STR にある各文字についての型情報を取り出します。 要求される TYPE は以下の三つのレベルのいずれかにすることができます: =begin original CT_CTYPE1 ANSI C and POSIX type information CT_CTYPE2 Text layout type information CT_CTYPE3 Text processing type information =end original CT_CTYPE1 ANSI C と POSIX 型情報 CT_CTYPE2 テキストレイアウト型情報 CT_CTYPE3 テキスト処理型情報 =begin original The return value is a list of values, each of wich is a bitwise OR of the applicable type bits from the corresponding table below: =end original 戻り値は、下記の対応テーブルからの適応できるタイプビットの OR による 値のリストです: @ct = GetStringType(LOCALE_SYSTEM_DEFAULT, CT_CTYPE1, "String"); =begin original ANSI C and POSIX character type information: =end original ANSI C と POSIX 文字型情報: =begin original C1_UPPER Uppercase C1_LOWER Lowercase C1_DIGIT Decimal digits C1_SPACE Space characters C1_PUNCT Punctuation C1_CNTRL Control characters C1_BLANK Blank characters C1_XDIGIT Hexadecimal digits C1_ALPHA Any letter =end original C1_UPPER 大文字 C1_LOWER 小文字 C1_DIGIT 数字 C1_SPACE 空白文字 C1_PUNCT 句読点 C1_CNTRL 制御文字 C1_BLANK 未定義文字 C1_XDIGIT 16 進文字 C1_ALPHA 任意の文字 =begin original Text layout type information: =end original テキストレイアウト型情報: C2_LEFTTORIGHT 左から右 C2_RIGHTTOLEFT 右から左 C2_EUROPENUMBER ヨーロッパの数字 C2_EUROPESEPARATOR ヨーロッパの桁区切り記号 C2_EUROPETERMINATOR ヨーロッパの数字終端記号 C2_ARABICNUMBER アラビア数字 C2_COMMONSEPARATOR 共通桁区切り記号 C2_BLOCKSEPARATOR ブロック区切り記号 C2_SEGMENTSEPARATOR セグメント区切り記号 C2_WHITESPACE 空白 C2_OTHERNEUTRAL その他の中間文字種 C2_NOTAPPLICABLE 暗黙的な方向のない文字(制御コードなど) =begin original Text precessing type information: =end original テキスト処理型情報: C3_NONSPACING 非スペース文字 C3_DIACRITIC 分音符 C3_VOWELMARK 母音字 C3_SYMBOL シンボル文字 C3_KATAKANA カタカナ C3_HIRAGANA ひらがな C3_HALFWIDTH 半角文字 C3_FULLWIDTH 全角文字 C3_IDEOGRAPH 表意文字 C3_ALPHA 任意の文字 C3_NOTAPPLICABLE 適用されない文字 =item GetSystemDefaultLangID() =begin original Returns the system default language identifier. =end original システムのデフォルト言語識別子を返します。 =item GetSystemDefaultLCID() =begin original Returns the system default locale identifier. =end original システムのデフォルトロケール識別子を返します。 =item GetUserDefaultLangID() =begin original Returns the user default language identifier. =end original ユーザのデフォルト言語識別子を返します。 =item GetUserDefaultLCID() =begin original Returns the user default locale identifier. =end original ユーザのデフォルト言語識別子を返します。 =item SendSettingChange() =begin original Sends a WM_SETTINGCHANGE message to all top level windows. =end original すべてのトップレベルウィンドウに WM_SETTINGCHANGE メッセージを送ります。 =item SetLocaleInfo(LCID, LCTYPE, LCDATA) =begin original Changes an item in the user override part of the locale setting LCID. It doesn't change the system default database. The following LCTYPEs are changeable: =end original ロケール設定 LCID のユーザ上書き部分での要素を変更します。 システムデフォルトデータベースは変更しません。 以下の LCTYPE が変更可能です: LOCALE_ICALENDARTYPE LOCALE_SDATE LOCALE_ICURRDIGITS LOCALE_SDECIMAL LOCALE_ICURRENCY LOCALE_SGROUPING LOCALE_IDIGITS LOCALE_SLIST LOCALE_IFIRSTDAYOFWEEK LOCALE_SLONGDATE LOCALE_IFIRSTWEEKOFYEAR LOCALE_SMONDECIMALSEP LOCALE_ILZERO LOCALE_SMONGROUPING LOCALE_IMEASURE LOCALE_SMONTHOUSANDSEP LOCALE_INEGCURR LOCALE_SNEGATIVESIGN LOCALE_INEGNUMBER LOCALE_SPOSITIVESIGN LOCALE_IPAPERSIZE LOCALE_SSHORTDATE LOCALE_ITIME LOCALE_STHOUSAND LOCALE_S1159 LOCALE_STIME LOCALE_S2359 LOCALE_STIMEFORMAT LOCALE_SCURRENCY LOCALE_SYEARMONTH =begin original You have to call SendSettingChange() to activate these changes for subsequent Win32::OLE::Variant object formatting because the OLE subsystem seems to cache locale information. =end original サブシステムはロケール情報をキャッシュしているようなので、後の Win32::OLE::Variant オブジェクトの書式設定のために、これらの変更を 有効にするためには SendSettingChange() を呼び出さなければなりません。 =item MAKELANGID(LANG,SUBLANG) =begin original Creates a lnguage identifier from a primary language and a sublanguage. =end original プライマリ言語とサブ言語から言語識別子を作成します。 =item PRIMARYLANGID(LANGID) =begin original Retrieves the primary language from a language identifier. =end original 言語識別子からプライマリ言語を取り出します。 =item SUBLANGID(LANGID) =begin original Retrieves the sublanguage from a language identifier. =end original 言語識別子からサブ言語を取り出します。 =item MAKELCID(LANGID) =begin original Creates a locale identifies from a language identifier. =end original 言語識別子からロケール識別子を作成します。 =item LANGIDFROMLCID(LCID) =begin original Retrieves a language identifier from a locale identifier. =end original ロケール識別子から言語識別子を取り出します。 =back =head2 Locale Types (ロケールタイプ) =over 8 =item LOCALE_ILANGUAGE =begin original The language identifier (in hex). =end original 言語識別子 (16 進数)。 =item LOCALE_SLANGUAGE =begin original The localized name of the language. =end original ローカライズされた言語名。 =item LOCALE_SENGLANGUAGE =begin original The ISO Standard 639 English name of the language. =end original 言語の ISO 標準 639 英語名。 =item LOCALE_SABBREVLANGNAME =begin original The three-letter abbreviated name of the language. The first two letters are from the ISO Standard 639 language name abbreviation. The third letter indicates the sublanguage type. =end original 言語名の 3 文字の省略形。 ISO 標準 639 の 2 文字の言語簡略名を使用します。 3 番目の文字はサブ言語タイプを示します。 =item LOCALE_SNATIVELANGNAME =begin original The native name of the language. =end original 言語のネイティブな名前。 =item LOCALE_ICOUNTRY =begin original The country code, which is based on international phone codes. =end original 国際電話コードをベースとした国コード。 =item LOCALE_SCOUNTRY =begin original The localized name of the country. =end original 国のローカライズドされた名前。 =item LOCALE_SENGCOUNTRY =begin original The English name of the country. =end original 国の英語名。 =item LOCALE_SABBREVCTRYNAME =begin original The ISO Standard 3166 abbreviated name of the country. =end original 国のISO 標準 3166 省略名。 =item LOCALE_SNATIVECTRYNAME =begin original The native name of the country. =end original 国のネイティブな名前。 =item LOCALE_IDEFAULTLANGUAGE =begin original Language identifier for the principal language spoken in this locale. =end original このロケールで話されている主要な言語のための言語識別子。 =item LOCALE_IDEFAULTCOUNTRY =begin original Country code for the principal country in this locale. =end original このロケールでの主要な国のための国コード。 =item LOCALE_IDEFAULTANSICODEPAGE =begin original The ANSI code page associated with this locale. Format: 4 Unicode decimal digits plus a Unicode null terminator. =end original このロケールに関連付けられたANSIコードページ。 書式: 4 Unicode 数字 プラス Unicode null 終端子。 =begin original XXX This should be translated by GetLocaleInfo. XXX =end original XXX これはGetLocaleInofoによって変換されるべきです XXX =item LOCALE_IDEFAULTCODEPAGE =begin original The OEM code page associated with the country. =end original 国に関連付けれられた OEM コードページ。 =item LOCALE_SLIST =begin original Characters used to separate list items (often a comma). =end original リスト要素を区切るために使われる文字(よくカンマが使われる)。 =item LOCALE_IMEASURE =begin original Default measurement system: =end original デフォルトの計測方式: =begin original 0 metric system (S.I.) 1 U.S. system =end original 0 メートル式 (SI 単位) 1 アメリカ式 =item LOCALE_SDECIMAL =begin original Characters used for the decimal separator (often a dot). =end original 小数点のための文字(よくピリオド点が使われる)。 =item LOCALE_STHOUSAND =begin original Characters used as the separator between groups of digits left of the decimal. =end original 数値の左側の数字のグループの間を区切るために使われる文字(桁区切り文字)。 =item LOCALE_SGROUPING =begin original Sizes for each group of digits to the left of the decimal. An explicit size is required for each group. Sizes are separated by semicolons. If the last value is 0, the preceding value is repeated. To group thousands, specify 3;0. =end original 数字の左側の数字のグループの大きさ(区切る桁数)。 各グループのために明確な大きさが必要とされます。 大きさはセミコロンで区切られます。 もし最後の値が 0 であれば、前の値が繰り返されます。 1000 単位でグループにするには、3;0 を指定してください。 =item LOCALE_IDIGITS =begin original The number of fractional digits. =end original 小数点以下の桁数。 =item LOCALE_ILZERO =begin original Whether to use leading zeros in decimal fields. A setting of 0 means use no leading zeros; 1 means use leading zeros. =end original 10 進数のフィールドで前に 0 をつけるかどうか。 0 を設定すると 0 はつきません; 1 は 0 をつけます。 =item LOCALE_SNATIVEDIGITS =begin original The ten characters that are the native equivalent of the ASCII 0-9. =end original ASCII の 0-9 と等価なネイティブ 10 文字。 =item LOCALE_INEGNUMBER =begin original Negative number mode. =end original 負の数値のモード。 0 (1.1) 1 -1.1 2 -1.1 3 1.1 4 1.1 =item LOCALE_SCURRENCY =begin original The string used as the local monetary symbol. =end original ローカルな通貨記号として使われる文字列。 =item LOCALE_SINTLSYMBOL =begin original Three characters of the International monetary symbol specified in ISO 4217, Codes for the Representation of Currencies and Funds, followed by the character separating this string from the amount. =end original 3 文字は ISO 4217 Codes for the Representation of Currency and Funds で 指定された国際通貨記号; その後にこの文字列と数量を区切る文字がつきます。 =item LOCALE_SMONDECIMALSEP =begin original Characters used for the monetary decimal separators. =end original 通貨での小数を区切るために使われる文字。 =item LOCALE_SMONTHOUSANDSEP =begin original Characters used as monetary separator between groups of digits left of the decimal. =end original 通貨での数字の桁を区切るために使われる文字。 =item LOCALE_SMONGROUPING =begin original Sizes for each group of monetary digits to the left of the decimal. An explicit size is needed for each group. Sizes are separated by semicolons. If the last value is 0, the preceding value is repeated. To group thousands, specify 3;0. =end original 通貨での数字の桁を区切る桁数。 各グループのために明確な大きさが必要とされます。 大きさはセミコロンで区切られます。 もし最後の値が 0 であれば、前の値が繰り返されます。 1000 単位でグループにするには、3;0 を指定してください。 =item LOCALE_ICURRDIGITS =begin original Number of fractional digits for the local monetary format. =end original ローカルな通貨フォーマットのための小数点以下の桁数。 =item LOCALE_IINTLCURRDIGITS =begin original Number of fractional digits for the international monetary format. =end original 国際通貨フォーマットのための小数点以下の桁数。 =item LOCALE_ICURRENCY =begin original Positive currency mode. =end original 正の通貨モード。 =begin original 0 Prefix, no separation. 1 Suffix, no separation. 2 Prefix, 1-character separation. 3 Suffix, 1-character separation. =end original 0 前に付ける、区切りなし 1 後ろに付ける、区切りなし 2 前に付ける、1 文字の区切り 3 後ろに付ける、1 文字の区切り =item LOCALE_INEGCURR =begin original Negative currency mode. =end original 負の通貨モード。 =begin original 0 ($1.1) 1 -$1.1 2 $-1.1 3 $1.1- 4 $(1.1$) 5 -1.1$ 6 1.1-$ 7 1.1$- 8 -1.1 $ (space before $) 9 -$ 1.1 (space after $) 10 1.1 $- (space before $) =end original 0 ($1.1) 1 -$1.1 2 $-1.1 3 $1.1- 4 $(1.1$) 5 -1.1$ 6 1.1-$ 7 1.1$- 8 -1.1 $ ($ の前に空白) 9 -$ 1.1 ($ の後に空白) 10 1.1 $- ($ の前に空白) =item LOCALE_ICALENDARTYPE =begin original The type of calendar currently in use. =end original 現在使われているカレンダーの種類。 =begin original 1 Gregorian (as in U.S.) 2 Gregorian (always English strings) 3 Era: Year of the Emperor (Japan) 4 Era: Year of the Republic of China 5 Tangun Era (Korea) =end original 1 グレゴリオ歴 (アメリカでのような) 2 グレゴリオ歴 (常に英語の文字列) 3 元号: (日本) 4 元号: 中華民国 5 檀紀 (朝鮮) =item LOCALE_IOPTIONALCALENDAR =begin original The additional calendar types available for this LCID. Can be a null-separated list of all valid optional calendars. Value is 0 for "None available" or any of the LOCALE_ICALENDARTYPE settings. =end original この LCID で利用できる追加のカレンダーの種類。 ヌルで区切ってオプションのカレンダがすべて入ったリストにすることができます。 何もなければ値は 0、あるいは LOCALE_ICALENDARTYPE 文字列のいずれか。 =begin original XXX null separated list should be translated by GetLocaleInfo XXX =end original XXX ヌル区切りのリストはGetLocaleInfoで変換されるべき XXX =item LOCALE_SDATE =begin original Characters used for the date separator. =end original 日付区切りに使われる文字。 =item LOCALE_STIME =begin original Characters used for the time separator. =end original 時刻区切りに使われる文字。 =item LOCALE_STIMEFORMAT =begin original Time-formatting string. =end original 時刻書式設定文字列。 =item LOCALE_SSHORTDATE =begin original Short Date_Time formatting strings for this locale. =end original このロケールでの短い日付時刻書式設定文字列。 =item LOCALE_SLONGDATE =begin original Long Date_Time formatting strings for this locale. =end original このロケールでの長い日付時刻書式設定文字列。 =item LOCALE_IDATE =begin original Short Date format-ordering specifier. =end original 短い長い日付書式の順序指定子。 =begin original 0 Month - Day - Year 1 Day - Month - Year 2 Year - Month - Day =end original 0 月 - 日 - 年 1 日 - 月 - 年 2 年 - 月 - 日 =item LOCALE_ILDATE =begin original Long Date format ordering specifier. Value can be any of the valid LOCALE_IDATE settings. =end original 長い日付書式の順序指定子。 LOCALE_IDATE 設定のための適切な値のいずれにもすることができます。 =item LOCALE_ITIME =begin original Time format specifier. =end original 時刻書式設定指定子。 =begin original 0 AM/PM 12-hour format. 1 24-hour format. =end original 0 AM/PM 12 時間形式。 1 24 時間形式。 =item LOCALE_ITIMEMARKPOSN =begin original Whether the time marker string (AM|PM) precedes or follows the time string. =end original 時刻マーカー文字列 (AM|PM) が時刻文字列の前につくか後につくか。 =begin original 0 Suffix (9:15 AM). 1 Prefix (AM 9:15). =end original 0 後ろにつく (9:15 AM). 1 前に付く (AM 9:15). =item LOCALE_ICENTURY =begin original Whether to use full 4-digit century. =end original 全 4 桁の年を使うかどうか。 =begin original 0 Two digit. 1 Full century. =end original 0 2 桁。 1 年全体。 =item LOCALE_ITLZERO =begin original Whether to use leading zeros in time fields. =end original 時刻フィールドで 0 が前につくかどうか。 =begin original 0 No leading zeros. 1 Leading zeros for hours. =end original 0 前に 0 を付けません。 1 時フィールドの前に 0 を付けます。 =item LOCALE_IDAYLZERO =begin original Whether to use leading zeros in day fields. Values as for LOCALE_ITLZERO. =end original 日のフィールドで 0 をつけるかどうか。 値は LOCALE_ITLZERO と同じ。 =item LOCALE_IMONLZERO =begin original Whether to use leading zeros in month fields. Values as for LOCALE_ITLZERO. =end original 月のフィールドで 0 をつけるかどうか。 値は LOCALE_ITLZERO と同じ。 =item LOCALE_S1159 =begin original String for the AM designator. =end original 午前を表すための文字列。 =item LOCALE_S2359 =begin original String for the PM designator. =end original 午後を表すための文字列。 =item LOCALE_IFIRSTWEEKOFYEAR =begin original Specifies which week of the year is considered first. =end original その年のどの週を最初と考えるかを指定します。 =begin original 0 Week containing 1/1 is the first week of the year. 1 First full week following 1/1is the first week of the year. 2 First week with at least 4 days is the first week of the year. =end original 0 1/1 が含まれる週をその年の最初の週とします。 1 1/1 の後の完全な 1 週間をその年の最初の週とします。 2 少なくとも 4 日ある最初の週をその年の最初の週とします。 =item LOCALE_IFIRSTDAYOFWEEK =begin original Specifies the day considered first in the week. Value "0" means SDAYNAME1 and value "6" means SDAYNAME7. =end original 週の最初の日と考えられる日を指定します。 値 "0" は SDAYNAME1 そして値 "6" は SDAYNAME7 を意味します。 =item LOCALE_SDAYNAME1 .. LOCALE_SDAYNAME7 =begin original Long name for Monday .. Sunday. =end original 月曜日から日曜日のための長い名前。 =item LOCALE_SABBREVDAYNAME1 .. LOCALE_SABBREVDAYNAME7 =begin original Abbreviated name for Monday .. Sunday. =end original 月曜日から日曜日のための省略名。 =item LOCALE_SMONTHNAME1 .. LOCALE_SMONTHNAME12 =begin original Long name for January .. December. =end original 1 月から 12 月のための長い名前。 =item LOCALE_SMONTHNAME13 =begin original Native name for 13th month, if it exists. =end original もしあれば 13 番目の月のネイティブな名前。 =item LOCALE_SABBREVMONTHNAME1 .. LOCALE_SABBREVMONTHNAME12 =begin original Abbreviated name for January .. December. =end original 1 月から 12 月のための省略名。 =item LOCALE_SABBREVMONTHNAME13 =begin original Native abbreviated name for 13th month, if it exists. =end original もしあれば 13 番目の月のネイティブな省略名。 =item LOCALE_SPOSITIVESIGN =begin original String value for the positive sign. =end original 正の記号のための文字列。 =item LOCALE_SNEGATIVESIGN =begin original String value for the negative sign. =end original 負の記号のための文字列。 =item LOCALE_IPOSSIGNPOSN =begin original Formatting index for positive values. =end original 正の値のための書式インデックス。 =begin original 0 Parentheses surround the amount and the monetary symbol. 1 The sign string precedes the amount and the monetary symbol. 2 The sign string precedes the amount and the monetary symbol. 3 The sign string precedes the amount and the monetary symbol. 4 The sign string precedes the amount and the monetary symbol. =end original 0 通貨記号も含めた全体を括弧で囲みます。 1 符号文字列を全体と通貨記号の前につけます。 2 符号文字列を全体と通貨記号の後につけます。 3 符号文字列を通貨記号の前につけます。 4 符号文字列を通貨記号の後につけます。 =item LOCALE_INEGSIGNPOSN =begin original Formatting index for negative values. Values as for LOCALE_IPOSSIGNPOSN. =end original 負の値のための書式インデックス。 値は LOCALE_IPOSSIGNPOSN と同じ。 =item LOCALE_IPOSSYMPRECEDES =begin original If the monetary symbol precedes, 1. If it succeeds a positive amount, 0. =end original もし通貨記号が前につくのであれば 1。 それが正の数値の後に続くのであれば 0。 =item LOCALE_IPOSSEPBYSPACE =begin original If the monetary symbol is separated by a space from a positive amount, 1. Otherwise, 0. =end original 正の数値から空白によって区切られるのであれば 1。 そうでなければ 0。 =item LOCALE_INEGSYMPRECEDES =begin original If the monetary symbol precedes, 1. If it succeeds a negative amount, 0. =end original もし通貨記号が前につくのであれば 1。 それが負の数値の後に続くのであれば 0。 =item LOCALE_INEGSEPBYSPACE =begin original If the monetary symbol is separated by a space from a negative amount, 1. Otherwise, 0. =end original 負の数値から空白によって区切られるのであれば 1。 そうでなければ 0。 =back =head1 AUTHORS/COPYRIGHT =begin original This module is part of the Win32::OLE distribution. =end original このモジュールは Win32::OLE ディストリビューションの一部です。 =begin meta Translate: Hippo2000 (0.14) Update: SHIRAKATA Kentaro (0.1502) Status: completed =end meta =cut