Mojolicious::Guides::FAQ - Frequently Asked Questions

This document contains answers for the most frequently asked questions about Mojolicious.

We hope these answers are to your satisfaction.

The short answer is "it doesn't", because we interpret the term "web framework" much more literally than others. With the emergence of the real-time web and new technologies such as WebSockets, we are facing new challenges that go way beyond what commonly used modules like LWP were designed for. Because of this, Mojolicious contains a whole new HTTP client/server stack called Mojo, which was heavily inspired by the original LWPng effort and carefully designed with these new requirements in mind. So while some of the higher abstraction layers might look similar to other web frameworks, it is more of a web toolkit and can even be used as the foundation for more advanced web frameworks.

We are optimizing Mojolicious for user-friendliness and development speed, without compromises. While there are no rules in Mojolicious::Guides::Contributing that forbid dependencies, we do currently discourage adding non-optional ones in favor of a faster and more painless installation process. And we do in fact already use several optional CPAN modules such as Cpanel::JSON::XS, EV, IO::Socket::Socks, IO::Socket::SSL, Net::DNS::Native, Plack and Role::Tiny to provide advanced functionality if possible.

Because we can make them rounder. Components specifically designed for user-friendliness and development speed are not easy to come by. We are strong believers of the Perl mantra "There is more than one way to do it", and our quest is to develop the best possible solutions for these two criteria.

In conformance with Mojolicious::Guides::Contributing, we will always deprecate a feature for 3 months, before removing or changing it in incompatible ways between major releases. New features can however be marked as experimental to explicitly exclude them from these rules. This gives us the necessary freedom to ensure a healthy future for Mojolicious. So, as long as you are not using anything marked experimental, untested or undocumented, you can always count on backwards compatibility, everything else would be considered a bug. However, to completely avoid any risk of accidental breakage, we do recommend following current best practices for version pinning with Carton for production setups.

Because there are no advantages, it drastically increases maintenance costs and installation times without giving us anything in return. It would only make sense if we wanted to pass ownership of a module to a new maintainer, which we already have done in the past.

We'd love to discuss your contributions to Mojolicious on our official IRC channel #mojo on irc.freenode.net (chat now!).

First of all, you need to be aware that according to the perlpolicy, only the two most recent stable release series of Perl are supported by the community and receive bug fixes, which are currently 5.28.x and 5.26.x. Mojolicious follows this model and fully supports these two release series. In addition we will also keep the distribution installable (and that means passing all tests) up to a certain legacy version that the core team deems worthy of supporting, but not specifically optimize for it, this is currently 5.10.1.

Note that Perl versions 5.10.x and 5.12.x are known to work very poorly with Mojolicious, and we strongly suggest you do not use them, to avoid stability and security issues. If it wasn't for a very vocal minority within the community we would not support these versions at all.

Windows is not officially supported by Mojolicious, even though we try to keep the distribution installable. There may be serious security and/or reliability issues. Some of the more advanced features, such as subprocesses and the Hypnotoad web server, will also require the use of the Windows Subsystem for Linux.

Mojolicious uses many environment variables both internally and externally, notably (but not exclusively) those starting with the prefix MOJO_* and PLACK_ENV. The test suite expects a clean environment; testing with a non-standard environment is unsupported and is unlikely to succeed. Therefore when installing or upgrading Mojolicious and when running its tests, we highly recommend using an environment which does not set these variables.

Standard route placeholders will not match the . character, however Mojolicious routes automatically take file extensions like .html, remove the leading ., and store the result in the format stash value. This can be useful for URL-based content negotiation, such as automatically rendering different templates based on the file extension. See "Formats" in Mojolicious::Guides::Routing for information on customizing format detection, or consider using relaxed placeholders to allow matching of the . character.

No, you can't, Hypnotoad is a bit special in this regard. Because when you initiate a zero downtime software upgrade (hot deployment), you are only really sending a USR2 signal to the already running server, and no other information can be passed along. What you can do instead, is to use a Mojolicious::Plugin::Config or Mojolicious::Plugin::JSONConfig configuration file.

Or if you don't actually need zero downtime software upgrades, just use Mojolicious::Command::prefork instead, which is otherwise almost identical to Hypnotoad.

There are many variations of this error, but most of them mean that TLS certificate verification in Mojo::UserAgent failed. This usually happens for two reasons. The most common one is that the peer certificate is simply invalid. If that's the case and you are certain that no MITM attack is being attempted, you can use the attribute "insecure" in Mojo::UserAgent or MOJO_INSECURE environment variable to disable certificate verification. And if that's not the case you might be missing the Mozilla::CA module, which is often required by IO::Socket::SSL to be able to verify certificates.

To protect your applications from excessively large requests and responses, our HTTP parser has a cap after which it will automatically stop accepting new data, and in most cases force the connection to be closed. The limit is 16MiB for requests, and 2GiB for responses by default. You can use the attributes "max_request_size" in Mojolicious and "max_response_size" in Mojo::UserAgent to change these values.

This is a very similar protection mechanism to the one described in the previous answer, but a little more specific. It limits the maximum length of the start-line for HTTP requests and responses. The limit is 8KiB by default, you can use the attribute "max_line_size" in Mojo::Message or MOJO_MAX_LINE_SIZE environment variable to change this value.

Almost the same as the previous answer, but this protection mechanism limits the number and maximum length of HTTP request and response headers. The limits are 100 headers with 8KiB each by default, you can use the attributes "max_lines" in Mojo::Headers and "max_line_size" in Mojo::Headers or the MOJO_MAX_LINES and MOJO_MAX_LINE_SIZE environment variables to change these values.

This protection mechanism limits how much content the HTTP parser is allowed to buffer when parsing chunked, compressed and multipart messages. The limit is around 256KiB by default, you can use the attribute "max_buffer_size" in Mojo::Content or MOJO_MAX_BUFFER_SIZE environment variable to change this value.

Mojolicious uses secret passphrases for security features such as signed cookies. It defaults to using "moniker" in Mojolicious, which is not very secure, so we added this log message as a reminder. You can change the passphrase with the attribute "secrets" in Mojolicious. Since some plugins also depend on it, you should try changing it as early as possible in your application.

Mojolicious has been designed from the ground up for non-blocking I/O and event loops. So when a new request comes in and no response is generated right away, it will assume that this was intentional and return control to the web server, which can then handle other requests while waiting for events such as timers to finally generate a response.

To protect your applications from denial-of-service attacks, all connections have an inactivity timeout which limits how long a connection may be inactive before being closed automatically. It defaults to 20 seconds for the user agent and 15 seconds for all built-in web servers, and can be changed with the attributes "inactivity_timeout" in Mojo::UserAgent and "inactivity_timeout" in Mojo::Server::Daemon or the MOJO_INACTIVITY_TIMEOUT environment variable. In Mojolicious applications you can also use the helper "inactivity_timeout" in Mojolicious::Plugin::DefaultHelpers to change it on demand for each connection individually. This timeout always applies, so you might have to tweak it for applications that take a long time to process a request.

This error message is often related to the one above, and means that the web server closed the connection before the user agent could receive the whole response or that the user agent got destroyed, which forces all connections to be closed immediately.

As long as they are accepting new connections, worker processes of all built-in pre-forking web servers send heartbeat messages to the manager process at regular intervals, to signal that they are still responsive. A blocking operation such as an infinite loop in your application can prevent this, and will force the affected worker to be restarted after a timeout. This timeout defaults to 30 seconds and can be extended with the attribute "heartbeat_timeout" in Mojo::Server::Prefork if your application requires it.

This error message usually appears after waiting for the results of a non-blocking operation for longer periods of time, because the underlying connection has been closed in the meantime and the value of the attribute "tx" in Mojolicious::Controller is no longer available. While there might not be a way to prevent the connection from getting closed, you can try to avoid this error message by keeping a reference to the transaction object that is not weakened.

  # Keep a strong reference to the transaction object
  my $tx = $c->render_later->tx;
  $c->ua->get_p('https://mojolicious.org')->then(sub {
    $c->render(text => 'Visited mojolicious.org');
  })->catch(sub {
    my $err = shift;
    $tx;
    $c->reply->exception($err);
  });

You can continue with Mojolicious::Guides now or take a look at the Mojolicious wiki, which contains a lot more documentation and examples by many different authors.

If you have any questions the documentation might not yet answer, don't hesitate to ask on the mailing list or the official IRC channel #mojo on irc.freenode.net (chat now!).